Emptying The Grass Bag; Attaching The Grass Bag - Cub Cadet SC 621 Operator's Manual

Hide thumbs Also See for SC 621:
Table of Contents

Advertisement

be adjusted to the condition of the lawn. If mowing has
been delayed and the grass has been allowed to grow
in excess of 4", mulching is not recommended. Mow
using the grass bag to reduce the grass height to 3 1/4"
maximum before mulching.

Attaching The Grass Bag

Remove wing nuts holding the mulching baffle or
side discharge chute in place and remove from unit.
Replace with grass bag adapter, while making
sure the inner lip of attachment goes under the
edge of the deck. Secure with wing nuts previously
removed. See Figure 8.
Grass Bag
Adapter
Wing
Nuts
Figure 8
Lift chute door on the grass bag adapter and slide
grass bag onto the adapter. See Figure 9.
NOTE: The chute door has been designed to move the
starter rope out of the way of the bag when the chute
door is opened.
Chute
Door
Grass
Bag
Figure 9

Emptying the Grass Bag

While holding the grass bag by both the rear handle
and the lower handle, lift the grass bag straight up
off the adapter. The chute door will move the rope
out of the way of the bag.
Continue to hold the lower handle and raise the
rear of the grass bag up toward your chest. The
grass bag will open and the grass clippings will
disperse. See Figure 10.
When replacing the grass bag, be sure the top of
the bag rests on the wire support between the
handles.
Grass
Clippings
Attaching Side Discharge Chute
Remove mulching baffle or grass bag adapter from
unit by disconnecting wing nuts.
Attach side discharge chute to unit and secure with
wing nuts. See Figure 11.
Side Discharge
Chute
Wing
Nuts
11
Figure 10
Figure 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc 621e

Table of Contents