Changing The Oil Filter - Hatz 2L41C Operator's Manual

2L41C, 2M41, 2M41Z
Step
6

8.2.13 Changing the oil filter

Safety note
Overview
Procedure
Step
1
2
3
4
5
HATZ
Activity
NOTE:
▪ Under no circumstances is the engine permitted to be oper-
ated if not all covers are mounted.
After a brief trial run, check the cylinder head cover for tight-
ness.
CAUTION
Danger of burns.
When working on the engine there is a danger of burns from hot
oil.
▪ Wear personal protective equipment (gloves).
▪ Collect the used oil and dispose of it according to local envi-
ronmental regulations.
Activity
Release the oil filter with a strap wrench and quickly unscrew
and remove it.
▪ HATZ order no. for strap wrench: 620 307 01.
Dispose of the old filter in accordance with local environmental
regulations.
Wipe spilled engine oil out of the oil baffle.
Lightly oil the sealing lip of the new oil filter.
Screw in the oil filter and tighten it by hand.
Operator's Manual
Maintenance
75