Important Safety Instructions; Personal Safety; Battery Tool Use And Care; Work Area Safety - DeWalt DCT410 Original Instructions Manual

En g li sh

important safety instructions

• R ead these instructions.
• K eep these instructions.
• H eed all warnings.
• F ollow all instructions.
• O nly use attachments/accessories specified by
the manufacturer.
• R efer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
Save all warningS and inStructionS for
future reference

Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Keep children and bystanders away
while operating an inspection camera.
Distractions can cause you to lose control.

personal safety

a) Stay alert, watch what you are doing
and use common sense when operating
an inspection camera. Do not use an
inspection camera while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating the inspection camera may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the inspection camera in
unexpected situations.
d) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
Use and Care
a) Store an idle inspection camera out of
the reach of children and do not allow
persons unfamiliar with the inspection
camera or these instructions to operate
4
the inspection camera. Inspection cameras
are dangerous in the hands of untrained
users.
b) Use the inspection camera, accessories,
etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the inspection camera
for operations different from those intended
could result in a hazardous situation.

Battery tool Use and Care

a) Recharge only with the charger
specified by D
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
c) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause irritation
or burns.
safety information for inspection
Cameras
WARNING: Do not disassemble
or modify the inspection camera.
There are no serviceable parts
inside. If you need assistance contact
your local dealer.
• Do not operate the inspection camera in
explosive atmospheres, such as in the
presence of flammable liquids, gases, or
dust. Inspection cameras create sparks which
may ignite the dust or fumes.
• The inspection camera should only be
used with specifically designated D
batteries. Use of any other batteries may
create a risk of fire.
• Store the inspection camera out of reach
of children and other untrained persons.
Tools are dangerous in the hands of untrained
users.
WALT. A charger that is
e
e
WALT