Wipers And Washers; Front Windscreen Wiper Controls; Rain Sensor - MG MG3 Owner's Handbook Manual

INSTRUMENTS AND CONTROLS

Wipers and Washers

Front Windscreen Wiper Controls

The wipers and washers will operate with the ignition in
position 1 or position 2.
Push the lever up to select different wiper speeds:
• Intermittent wipe/automatic wipe (1)
• Normal speed wipe (2)
• Fast speed wipe (3)
32
IMPORTANT
• Avoid operating the wipers on a dry screen.
• In freezing or very hot conditions, ensure that the
blades are not frozen or stuck to the glass before
being operated.
• In winter, remove snow or ice from around the arms
and blades, including the wiped area of the screen.
Single Wipe
Pull the lever (4) down and release (if the lever is held
down, the wipers will operate at high speed until the lever
is released).
Variable Delay - intermittent wipe
To select intermittent wipe push the lever up to position(1),
Rotate the switch (5) to vary the intermittent time of wiper
operation.
*

Rain Sensor

Some models are equipped with a rain sensor fitted to
the inside of the windscreen behind the rear view mirror.
*