Page 1 Owners Handbook...
Page 2: Table Of Contents
CONTENTS Introduction ............................ 1 The Owner's Handbook ................................. 1 Status at Time of Printing ............................... 1 Symbols Used .................................... 1 In an Emergency..................................2 Vehicle Identification Information....................3 Vehicle Identification ................................3 Vehicle Identification Label ..............................4 1 Instruments and Controls ..................... 5 Instruments and Controls Overview....................
Page 3 CONTENTS Odometer....................................10 Vehicle Information Display ..............................11 Warning Lights and Indicators....................26 Lighting Switch ..........................34 Master Lighting Switch................................34 Instrument Dimmer Control ............................... 35 Manual Adjustment Headlight Levelling .......................... 35 Dynamic Headlamp Levelling ............................. 36 Cornering Lamps .................................. 36 Fog Lights....................................
Page 4 CONTENTS Horn............................... 44 Mirrors ............................45 Exterior Mirrors..................................45 Interior Rear-view Mirror ..............................47 Vanity Mirror..........................48 Windows............................49 Power Operated Window Switch ............................49 Window Operation................................49 Interior Light ..........................51 Front Courtesy and Map Reading Lights........................... 51 Rear Courtesy Light................................52 Power Socket ..........................
Page 5 CONTENTS Cup Holder ........................... 57 Front Cup Holder ................................. 57 Rear Cup Holder ..................................57 2 Air Conditioning......................59 Ventilation ............................. 60 Vents ......................................61 Electronic Air Conditioning Controls ..................63 Console Panel..................................63 Air Conditioning Display............................... 64 Air Distribution..................................64 Blower .......................................
Page 6 CONTENTS AUTO Control..................................68 Manual Control ..................................69 Blower ....................................... 70 Dual Zone Temperature Control ............................70 MONO Control..................................70 Heated Rear Screen ................................71 A/C Button....................................71 OFF ......................................71 Air Recirculation ..................................72 Defrost/Demist ..................................72 Heated Front Seats ................................73 3 Audio System .......................
Page 7 CONTENTS 4 Seats and Restraints ....................85 Seats............................... 86 Correct Seating Position ............................... 86 Head Restraints..................................87 Manual Front Seat ................................88 Power Front Seat ................................. 89 Heating Front Seat.................................. 89 Folding the Rear Seats ................................90 Seat Belts ............................92 Safety Information...................................
Page 8 CONTENTS Child Restraint Instructions ...............................103 5 Starting and Driving ....................111 Handsets............................112 Introduction ...................................112 Handset Battery Removing and Refitting ........................113 Emergency Key ..................................115 Child-Proof Locks ........................116 Alarm System ..........................117 Engine Immobilisation ................................117 Locking the Car and Arming the Alarm ..........................117 Tailgate.....................................121 Starting and Driving........................
Page 9 CONTENTS Environment Protection ..............................126 Driving Style...................................126 How to save fuel and extend the life of the vehicle .....................127 Maintenance ...................................129 Diesel Particulate Filter......................130 Fuel......................................130 Starting ....................................130 Driving.....................................131 Fuel System..........................132 Fuel Requirements................................132 Fuel Filler ....................................132 Fuel Filling ....................................133 Inertia Switch..................................134 6-Speed Manual Transmission....................
Page 10 CONTENTS Stability Control System (SCS) ............................144 Traction Control System (TCS) ............................144 Switching On and Off................................145 SCS/TCS Warning Light ..............................145 Tyre Pressure Monitoring System (TPMS)................146 Cruise Control .......................... 148 Intelligent Stop/Start System ....................150 Parking Aid System........................153 Ultrasonic Sensor Parking Aid System ..........................153 Rear Parking Camera ................................154...
Page 11 CONTENTS Using Booster Cables ................................159 Starting the Vehicle................................159 Vehicle Recovery......................... 161 Towing for Recovery................................161 Transporter or Trailer with Rope ............................164 Tyre Repair ..........................165 Tool Identification ................................165 Tyre Repair ....................................166 Fuse Replacement ........................169 Fuses ......................................169 Passenger Compartment Fuse Box ..........................170 Auxiliary Fuse Box................................174 Battery Top Fuse Box ................................175 Engine Compartment Fuse Box ............................176...
Page 12 CONTENTS Routine Servicing ........................186 Bonnet ............................190 Opening the Bonnet................................190 Closing the Bonnet................................190 Warning When the Bonnet is Open ..........................190 Engine Compartment ........................ 191 Engine ............................192 Diesel Engine Oil...................................192 Cooling System........................... 195 Coolant Check and Top Up ...............................195 Coolant Specification................................196 Brakes ............................
Page 13 CONTENTS Battery............................201 Battery Safety..................................201 Battery Disconnection and Replacement........................201 Battery Charging...................................203 Battery Maintenance ................................204 Washers............................205 Windscreen and Front Lamp Washer Check and Top Up..................205 Washer Nozzles..................................206 Washing Fluid Specification ..............................206 Wipers ............................207 Windscreen Wiper Blades ..............................207 Replacing Front Wiper Blades ............................208 Tyres.............................
Page 14 CONTENTS Replacement Tyres ................................212 Wheel Fitment Rotation ..............................212 Snow Chains ..................................213 Cleaning and Vehicle Care......................214 Washing Your Car ................................214 Cleaning the Interior................................216 8 Technical Data ......................219 Technical Data Dimensions ....................... 220 Weights............................221 Towing Weights ..................................221 Major Parameters of Engine ..................... 222 Recommended Fluids and Capacities ..................
Page 16: Introduction
Always remember that if you have any queries concerning information that must be considered with the operation or specification of your car, your MG great care, in order to reduce the risk of Authorised Repairer will be glad to advise you.
Page 17: In An Emergency
PREFACE In an Emergency IMPORTANT This symbol indicates parts described must be disposed of by authorised persons or bodies to protect the Remember the breakdown safety code environment. If a breakdown occurs while travelling: Asterisk • Wherever possible, consistent with road safety and traffic conditions, the car should be moved off the An asterisk (*) appearing within the text, identifies features main thoroughfare, preferably into a lay-by.
Page 18: Vehicle Identification Information
On a label attached to the upper face of the transmission housing. 1 Vehicle Identification Number (VIN) 2 Engine Number 3 Transmission Number Always quote the Vehicle Identification Number (VIN) when communicating with your MG Authorised Repairer. Vehicle Identification Location VIN Location...
Page 19: Vehicle Identification Label
PREFACE Vehicle Identification Label Location of Vehicle Identification Label The vehicle identification label contains the following information. • Type Approval Number The Vehicle Identification Label is located adjacent to the • Vehicle Identification Number (VIN) top hinge on the right hand front door. •...
Page 20: Instruments And Controls
Instruments and Controls Instruments and Controls Overview 55 Storage Equipment Instrument Pack 57 Cup Holder 10 Message Centre 26 Warning Lights and Indicators 34 Lighting Switch 40 Wipers and Washers 43 Steering Column 44 Horn 45 Mirrors 48 Vanity Mirror 49 Windows 51 Interior Light 53 Power Socket...
Page 21: Instruments And Controls Overview
INSTRUMENTS AND CONTROLS Instruments and Controls Overview...
Page 22 INSTRUMENTS AND CONTROLS Passenger Airbag Electric Exterior Mirror and Window Controls Entertainment Control Faceplate Accelerator Pedal In Car Entertainment Display Brake Pedal Direction Indicators/Main Beam Lever Ignition Switch Instrument Pack Clutch Pedal Driver Airbag Gear Shift Lever Horn Heater/Air Conditioning Controls Wiper/Washer Controls Bonnet Release Master Lighting Switch...
Page 23: Instrument Pack
High engine coolant temperature could result severe damage. Stop the vehicle and switch off the engine as soon as safety permits and seek MG Authorised Repairer at the earliest opportunity. If the engine coolant temperature sensor malfunctions, all...
Page 24: Tachometer
INSTRUMENTS AND CONTROLS Temperature indicator will flash with the message to fall to a critical state, the fuel lamp will flash along with Sensor Fault Low Fuel appearing in the message centre. the 1st segment. The message will appear in the message centre and an audible warning will sound again.
Page 25: Message Centre
INSTRUMENTS AND CONTROLS Message Centre Temperature and Clock When the ignition is in position Ⅱ, the current ambient temperature and time are displayed. Gear Position Display/Gear Change Reminder Gear position (1, 2, 3, 4, 5, 6, R, N) is displayed in this zone when the function is enabled.
Page 26: Vehicle Information Display
INSTRUMENTS AND CONTROLS Vehicle Information Display Warning Information The vehicle information display uses two methods to convey warning information to the driver. These are: • A message accompanied by a symbol • A view of the vehicle with an open door, bonnet or boot/tailgate Some warning messages are re-enforced by an audible warning.
Page 27 See ‘Inertia Inertia Switch’ in An incorrect Switch ‘Starting & handset has been Tripped Driving’. inserted in the Engine docking station. Consult MG Disabled The engine is Fuel Authorised immobilised. System Repairer at Use correct Fault the earliest handset. opportunity.
Page 28 INSTRUMENTS AND CONTROLS Icon Message Action Icon Message Action See ‘Coolant Alarm Information. Check and Triggered Coolant Top Up’ in ‘Maintenance’. Door Information. Locked A dipped beam or direction Door indicator bulb Lamp UnLocked has failed, Information. Failure / Fail To replace at Lock the earliest...
Page 29 INSTRUMENTS AND CONTROLS Icon Message Action Icon Message Action Stop See ‘Stop/Start Indicates the Start Off Intelligent Fasten need to fasten / Stop System’ in Seatbelt the driver’s seat Start ‘Starting & belt to enable Fault Driving’. Restart the engine to restart.
Page 30 INSTRUMENTS AND CONTROLS Icon Message Action Icon Message Action Consult MG Gradient Indicating Clutch Authorised High gradient is high. Switch Repairer at Fault the earliest Indicating to the Press opportunity. driver the need Brake to press the Select Release Indicating the...
Page 31 Requesting the Requesting the Caution！ driver to adjust driver to change Wheels the steering gear in direction wheel. of arrow. Straight Consult MG Caution！ Requesting the Diesel Authorised Wheels driver to adjust Particle Repairer at the steering Filter the earliest Straight wheel.
Page 32 INSTRUMENTS AND CONTROLS Low line models (A) one or more doors, or the bonnet are not closed when • : Short press (< 2 seconds) vehicle speed exceeds 3MPH (5km/h), this warning will be the button on the end of the direction indicators/main repeated in the display.
Page 33 INSTRUMENTS AND CONTROLS • Last Journey The distance display commences at 15,000 miles or 24,000 km and progressively reduces in increments of 25 miles By pressing and holding the button or thumbwheel for or 50 km as the car is driven, until zero is reached. The longer than 2 seconds, the selected display can be reset relevant service should be carried as soon as the distance (not including digital speed, fuel consumption, range to...
Page 34 INSTRUMENTS AND CONTROLS Fuel Consumption Average Speed This function is automatic and indicates the instantaneous This function is automatic and indicates the average speed fuel consumption. since the last time it was reset. The average speed display can be reset at any time to begin calculating a new average Range to Empty speed value for a particular journey or driving condition.
Page 35: Menu
INSTRUMENTS AND CONTROLS Menu be reset at any time to begin calculating new values for a particular journey or driving conditions. It also can be reset automatically after the vehicle has been at rest (speed < 3 MPH or < 5 km/h) for 30 minutes. During the reset process, the data values for the current journey function are saved for use by the last journey function.
Page 36 INSTRUMENTS AND CONTROLS • Speed Warning Speed Warning function can be set ‘off’ as required. • Next Service Next Service • Function Reset Shows the service interval announcement symbol, the • TPMS Reset estimated date of the next service and the distance •...
Page 37 TPMS Reset Security will appear and if unsuccessful, Failed will appear, consult your MG Authorised Repairer. Allows personalisation of the speed locking function and Note: TPMS will need to be reset every time the tyres unlocking function. are replaced or the pressures are changed.
Page 38 INSTRUMENTS AND CONTROLS Consumption increments of 30 seconds can be selected. Select return to upper level menu. L/100 km km/L Mpg (US) Select either (UK) . Select to return to upper level menu. Find My Car Distance Enable or disable automatic illumination of nominated exterior lamps for a specific duration, when unlocking Miles Select...
Page 39 INSTRUMENTS AND CONTROLS Language Dial Sweep 中中中文文文 English Deutsch Français Italiano Select Enable or disable the start-up dial sweep function in the Españo Português Dial Sweep to set the language of the cluster. Press and hold , then select displayed text for message centre.
Page 40 INSTRUMENTS AND CONTROLS Journey Last Journey as required. Select return to upper level menu. Adaptive Frontlighting System (AFS) Enable or disable the AFS function. Press and hold then select as required. Select to return to upper level menu. Digital Clock This allows the setting of the digital clock if no signal is available from the in car entertainment system.
Page 41: Warning Lights And Indicators
INSTRUMENTS AND CONTROLS Warning Lights and Indicators...
Page 42 INSTRUMENTS AND CONTROLS Main Beam - Blue If either warning light flashes very rapidly, this means that one of the front or rear direction indicator lights is not operating. Note: Failure of a side repeater light will have no effect Illuminates when the headlights are switched to main beam.
Page 43 INSTRUMENTS AND CONTROLS Cruise Control - Yellow/Green and an audible warning will be given when the engine is started. Seek an MG Authorised Repairer urgently. Seat Belt Warning - Red The light illuminates green when the master switch is pressed but no cruise speed is active and yellow when cruise control is active.
Page 44 ), or illuminates when driving, it indicates to the driver that the charging output from the alternator to the battery is low. Seek an MG Authorised Repairer urgently. The light illuminates yellow as a lamp check when the ignition is in position Ⅱ and extinguishes after a few Tyre Pressure Monitoring System (TPMS) seconds.
Page 45 ABS system and you should seek an MG Authorised Repairer at the earliest This warning light is used to indicate an engine operation opportunity. fault is detected by the engine management system. The...
Page 46 If an engine operation problem occurs while the vehicle is Seek an MG Authorised Repairer urgently. being driven, the indicator will illuminate and the message If ESCL has a fault, the warning light will illuminate and the Engine Fault will appear in the message centre.
Page 47 . Seek lamp check when the ignition is in position Ⅱ. The warning an MG Authorised Repairer urgently. light illuminates green to indicate to the driver that the engine is being controlled by stop start system. When...
Page 48 INSTRUMENTS AND CONTROLS Passenger Airbag On information in ‘Locking the Car and Arming the Alarm’ in will appear in the message ‘Starting & Driving’. centre. Note: The remote display module is mounted on the Glow Plug Warning - Yellow roof. Passenger Airbag On - Yellow The warning light illuminates yellow.
Page 49: Lighting Switch
INSTRUMENTS AND CONTROLS Lighting Switch AUTO Lights With the ignition switched on, turn the master lighting Master Lighting Switch switch to AUTO position (1). The AUTO lighting system constantly monitors the ambient light levels and automatically switches the dipped headlamps, side light, tail lights on and off as required.
Page 50: Instrument Dimmer Control
INSTRUMENTS AND CONTROLS Headlight Courtesy Delay When the ignition is in position II, and the sidelamps or dipped headlamps are on, rotate the control up to Having stopped the car and turn the ignition off. Then increase or down to decrease instrument illumination. The move the direction indicator lever to the main beam instrument dimmer also controls the backlight illumination position.
Page 51: Dynamic Headlamp Levelling
INSTRUMENTS AND CONTROLS Cornering Lamps adjusted according to the vehicle loading condition in accordance with the following table: Cornering Lamps are part of the Adaptive Frontlighting Position Load System (AFS). Illumination of driver blind spots when cornering is achieved by adding extra lights to the Driver, or driver &...
Page 52: Fog Lights
INSTRUMENTS AND CONTROLS Fog Lights Note: The rear fog lights are switched off automatically when the main lighting switch is turned Fog lights should only be used in poor off. visibility, inappropriate use could dazzle other drivers. Rear Fog Lights When the ignition is in position II, lights are switched on, pull the light switch out to position 1 to switch on the rear fog lights.
Page 53: Direction Indicator/Main Beam Lever
INSTRUMENTS AND CONTROLS Direction Indicator/Main Beam Lever Direction Indicators Move the lever down (1) to indicate a LEFT turn, or up Take care not to dazzle oncoming vehicles (2) to indicate a RIGHT turn. The corresponding GREEN when driving using main beam headlights. warning light in the instrument pack will flash in time with the direction indicators.
Page 54: Hazard Warning Lights
INSTRUMENTS AND CONTROLS Hazard Warning Lights Lamp Failure Failure of any of the following bulbs will be confirmed by a message and symbol in the message centre. • Front direction indicator. • Rear direction indicator. • Dipped beam headlamps. Note: The side lamps, side repeater lamps and centre high mounted stop lamp are not monitored by this system.
Page 55: Wipers And Washers
INSTRUMENTS AND CONTROLS Wipers and Washers Front Windscreen Wiper Controls IMPORTANT • Avoid operating the wipers on a dry screen. • In freezing or very hot conditions, ensure that the blades are not frozen or stuck to the glass before being operated.
Page 56: Programmed Wash Wipe
INSTRUMENTS AND CONTROLS • Single Wipe (4) Fast Speed Wipe • Wiper Delay Switch (5) Push the lever (3) up to select the fast speed wipe, wipers • Programmed Wash/Wipe (6) will wipe at high speed. If the road speed drops below 8 km/h while the wipers are operating, they will slow to the Intermittent wipe/Automatic wipe next slowest operating mode;...
Page 57: Headlamp Washers
INSTRUMENTS AND CONTROLS IMPORTANT set to intermittent, the variable delay will be adjusted automatically according to the information supplied by the If the washers fail to deliver the screen wash solution rain sensor. (dirt or ice may have blocked the jets), release the Note: If the sensor detects constant rain, the wipers lever immediately.
Page 58: Steering Column
INSTRUMENTS AND CONTROLS Steering Column To adjust the angle and height of the steering column to suit your driving position: Steering Column Adjustment 1 Fully release the locking lever. Do not attempt to adjust the height or angle 2 Hold the steering wheel in both hands and tilt the of the steering wheel while the car is in steering column up or down to move the wheel into motion.
Page 59: Horn
INSTRUMENTS AND CONTROLS Horn please ensure that you press in this area to avoid any potential conflict with the operation of the airbag. IMPORTANT To avoid possible SRS issues, please do not press with excessive force or hit the airbag cover when operating the horn.
Page 60: Mirrors
INSTRUMENTS AND CONTROLS Mirrors • With the ignition in position I or II , press the appropriate switch (1) to select the left or right mirror. Exterior Mirrors The selected (L) or (R) button will be illuminated. • Use switch (2) to tilt the mirror glass up/down/left or Note: Objects viewed in exterior mirrors may appear right.
Page 61 INSTRUMENTS AND CONTROLS IMPORTANT • The exterior mirror glass is electronically adjusted using the mirror switch, DO NOT attempt to adjust the mirror glass by hand, this could result in damage to the adjustment components. • Exterior mirrors are operated with motors. Therefore, flushing with high pressure water jets directly in the car wash may result in the failure of the electric device.
Page 62: Interior Rear-View Mirror
INSTRUMENTS AND CONTROLS Interior Rear-view Mirror driver. The automatic dipping function is inhibited when reverse gear is selected. Before driving, adjust the body of the mirror by hand to achieve the best possible view to the rear. The dipping Manual Mirror function of both the automatic and manual mirrors helps to reduce glare from the headlights of following vehicles at night.
Page 63: Vanity Mirror
INSTRUMENTS AND CONTROLS Vanity Mirror The driver’s vanity mirror should only be used when the car is stationary. Pivot the sun visor (1) downward and open the cover to use the vanity mirror (2).
Page 64: Windows
INSTRUMENTS AND CONTROLS Windows Window Operation Ensure children are kept clear when raising or Power Operated Window Switch lowering a window. Push the switch (1-4) down to lower, and pull the switch up to raise the window. The window will stop moving as soon as the switch is released (unless the ‘One-Touch’...
Page 65 INSTRUMENTS AND CONTROLS Note: It is recommended that you ISOLATE the rear ‘unlock’ button for approximately 3 seconds will fully open window switches when carrying a child. all the windows. Note: If the battery is disconnected, the ‘One-Touch’ ‘One-Touch’ Down and ‘Anti-Trap’...
Page 66: Interior Light
INSTRUMENTS AND CONTROLS Interior Light Automatic Operation Courtesy light illumination occurs automatically whenever Front Courtesy and Map Reading Lights the following occur. • The car is unlocked. • A door or the tailgate is opened. • The handset is removed, providing the sidelights have been illuminated during the previous 30 seconds.
Page 67: Rear Courtesy Light
INSTRUMENTS AND CONTROLS Rear Courtesy Light Press the switch (arrowed) to illuminate the courtesy light, press again to switch off.
Page 68: Power Socket
INSTRUMENTS AND CONTROLS Power Socket After using, insert the socket lid back and close the front ashtray cover. Front Power Socket Note: The voltage of the power socket is 12V supply with a maximum power output of 120W. Please ensure the socket lid is inserted when the power socket is not in use.
Page 69 INSTRUMENTS AND CONTROLS Note: Extended use of the accessory power socket when the engine is switched off will cause premature discharging of the vehicle battery.
Page 70: Storage Equipment
INSTRUMENTS AND CONTROLS Storage Equipment Glovebox Ashtray Gently press the ashtray cover to open. To open the glovebox, pull the handle. The integral lamp To remove and empty the ashtray, lift the insert tray from will illuminate automatically. the surround and remove. Refit by installing the insert tray. To close the glovebox, raise the lid, and push to close.
Page 71: Cubby Box
INSTRUMENTS AND CONTROLS Cubby Box Press the release catch (arrowed) to open the lid. Push down to close.
Page 72: Cup Holder
INSTRUMENTS AND CONTROLS Cup Holder Briefly press the front of panel to open the front cup holder. Push down to close it. Do not place hot drinks in the cup holder whilst driving. Spillage may result in personal Rear Cup Holder injury or damage.
Page 74: Air Conditioning
Air Conditioning 60 Ventilation 63 Electronic Air Conditioning Controls 67 Automatic Air Conditioning Controls...
Page 75: Ventilation
AIR CONDITIONING Ventilation 1 Side vents 2 Windscreen vents 3 Centre vents 4 Front seat feet vents 5 Centre console vents 6 Front side window vents Two additional vents which direct air to the feet of rear seat passengers are fitted beneath the carpet.
Page 76: Vents
AIR CONDITIONING Vents The heating and ventilation system provides fresh or heated air to the interior of the car from the air intake grille in Centre Vents front of the windscreen. Always keep the air intake grille clear of obstructions such as leaves, snow or ice.
Page 77 AIR CONDITIONING Side Vents Centre Console Vents Rotate the thumb-wheel to the left to close or to the right to open the vents. Direct the air flow by moving the control in the centre of the louvres up or down, or from Rotate the thumb-wheel down to close or up to open the side to side.
Page 78: Electronic Air Conditioning Controls
AIR CONDITIONING Electronic Air Conditioning Controls 1 Left side heated seat 2 Air conditioning display Console Panel 3 Right side heated seat 4 Air distribution setting controls 5 Blower speed control 6 Heated rear screen 7 A/C on/off 8 Air recirculation 9 Defrost/Demist 10 Temperature control...
Page 79: Air Conditioning Display
AIR CONDITIONING Air Conditioning Display The temperature set will be shown by the number of bars (between 1 and 8) in the display. The greater the number of bars, the higher the temperature. Air Distribution Press the appropriate button to achieve the desired air distribution modes.
Page 80: Blower
AIR CONDITIONING For ‘feet'. Directs air to the feet vents. The heated rear screen will only function with the engine operating. Blower Press to operate; the LED in the switch will illuminate and a symbol appears in the display. The heated rear screen will switch off automatically after 12 minutes.
Page 81: Air Recirculation
AIR CONDITIONING When defrost/demist is selected pressing the A/C button off recirculation and turn the controls to maximum will isolate the compressor, the defrost/demist selection demisting. will remain. Defrost/Demist Air Recirculation With this button pressed, air conditioning is switched on, With this button pressed, the air inside the car is the blower is set to maximum speed, air distribution is set recirculated and the air intake is closed, preventing the...
Page 82: Automatic Air Conditioning Controls
AIR CONDITIONING Automatic Air Conditioning Controls 1 Air conditioning display 2 For ‘face' Console Panel 3 System off 4 Right side heated seat 5 Increase blower speed 6 MONO control/Right zone temperature selected 7 Decrease blower speed 8 Heated rear window 9 Air conditioning on 10 Air recirculation 11 Defrost/demist...
Page 83: Automatic Air Conditioning Display
AIR CONDITIONING Automatic Air Conditioning Display AUTO Control Auto Control mode operation: AUTO control is achieved by rotating both temperature controls to set the desired temperature and then pressing the AUTO control. The air conditioning system is then programmed to operate the blower, air distribution and recirculation settings to maintain optimum levels of comfort within the car.
Page 84: Manual Control
AIR CONDITIONING Manual Control You can set the blower and air distribution manually, if you prefer. In this condition, AUTO symbol is not shown, indicating that AUTO is not selected. Note: You can switch the air distribution mode by operating the button according to the current mode. Current distribution mode in display The air distribution mode after pressing button Switch...
Page 85: Blower
AIR CONDITIONING Blower The blower speed is automatically set when in AUTO For ‘face'. Directs air to the side, centre and centre console mode. vents. In manual mode, press the ‘+' button to increase blower speed or the ‘-' button to decrease. The blower speed will be shown in the display, represented by between 1 and 8 For ‘face' and ‘feet' .
Page 86: Heated Rear Screen
AIR CONDITIONING A/C Button zone temperature selected , MONO will appear in the display. Press MONO again to switch to dual zone mode and the left zone temperature selected to set the temperature for Press the A/C Button to switch the air conditioning system the passenger side.
Page 87: Air Recirculation
AIR CONDITIONING Air Recirculation Note: Leaving the system in recirculation mode can cause the windscreen to mist. Defrost/Demist With this button pressed, the air inside the car is recirculated and the air intake is closed, preventing the entry of traffic fumes. Pressing this button the indicator light illuminates, the When reversing, or operating the front screen washers, defrost/demist symbol appears in the display activating the...
Page 88: Heated Front Seats
AIR CONDITIONING Heated Front Seats Pressing these buttons will activate the driver’s and passenger’s heated seats. During the 10 minute timed activation period these are thermostatically controlled, so once the seat reaches 40°, the heater will turn off. The heat pad will turn on again should its temperature fall to 25°, this will continue until either the switch is operated again to turn them off or the 10 minute operation period expires.
Page 90: Audio System
Audio System 76 Audio System...
Page 91: Audio System
AUDIO SYSTEM Audio System 6 Distortion, interference and lack of signal clarity, are often attributed to a fault in the radio. Problems of This section of the handbook covers the audio systems this kind are usually caused by atmospheric conditions, fitted to (S) model variants.
Page 92: Audio System Control Panel
AUDIO SYSTEM Audio System Control Panel 1 SRC (Source) 2 BAND 3 MIX 4 TA (Traffic Announcement) 5 Folder 6 CD Slot 7 CD Eject Button 8 INFO 9 Sound Settings Button 10 MENU 11 Downward Search Button 12 On/Off, Volume 13 Upward Search Button 14 MUTE 15 Preset Station Number Buttons...
Page 93: Control Buttons
AUDIO SYSTEM Control Buttons Basic Operation On/Off Power Press the On/Off button to switch on the audio system, press again to switch off. 30 Minutes Play Function When the ignition is switched off, press the On/Off button to operate the audio unit for up to 30 minutes. After 30 minutes the unit will switch off.
Page 94 AUDIO SYSTEM Volume Control TA (Traffic Announcement) Rotate the volume control clockwise to increase the Press to enable TA function, if the radio is on, the player volume or anti-clockwise to decrease volume. will search automatically, if current station doesn’t support TA, press the button again to disable TA.
Page 95: Radio Operation
AUDIO SYSTEM Radio Operation Manual Tuning Mode Press and hold either of the search buttons until the Select Source ‘MANUAL’ is display on the screen. Press either of the Press the SRC button to select radio as the source. search buttons to enter into manual tuning mode. seconds after the last button press, the system will leave BAND manual tuning mode.
Page 96 AUDIO SYSTEM Note: Manual store overwrites any stations already When the RDS radio is playing, and the name of the station stored on the pre-set buttons. radio exists, it is shown on the display. Repeatedly press the INFO button to read PTY Auto Store (Programme Type), TEXT of the current RDS radio •...
Page 97: Cd, Usb, Aux Player
AUDIO SYSTEM CD, USB, AUX Player Connect USB Insert a USB memory stick via the USB connection The Compact Disc (CD) player fitted to your inside the stowage tray located on the lower side of the car will only accept one disc at a time. instrument panel adjacent to the driver’s door, press SRC to access the USB mode.
Page 98 AUDIO SYSTEM press the Downward Search Button once to return to the previous track. Fast Forward/Rewind 1 Press and hold the Downwards Search Button to fast rewind. 2 Press and hold the Upwards Search Button to fast forward. Press MIX to play the tracks on a specific CD/USB in a random order.
Page 99: Antenna
AUDIO SYSTEM INFO Antenna When playing MP3/WMA files, repeatedly press INFO to view filename, folder name and any other identification that has been added to the disc. If the number of characters will not fit on the display, the text will be scrolled across the display.
Page 100: Seats And Restraints
Seats and Restraints 86 Seats 92 Seat Belts 96 Airbag Supplementary Restraint System 103 Child Restraints...
Page 101: Seats
SEATS AND RESTRAINTS Seats Make sure your driving position is comfortable and enables you to maintain full control of the vehicle. Correct Seating Position To avoid the risk of loss of control and personal injury, DO NOT adjust the seats while the car is moving.
Page 102: Head Restraints
SEATS AND RESTRAINTS Head Restraints Adjust the head restraint so that the top of the head restraint is in line with the top of the occupant's head and the back of the occupant's head is as close as possible to the head restraint.
Page 103: Manual Front Seat
SEATS AND RESTRAINTS Manual Front Seat 3 Backrest Adjustment Lift the lever (3) and allow the seat to move, tilt the backrest to the desired position. 4 Lumbar Support Adjustment Rotate the handwheel (4) to adjust. 1 Forward/Rearward Adjustment Lift the lever (1) and slide the seat into position. Make sure the seat is locked in position before driving.
Page 104: Power Front Seat
SEATS AND RESTRAINTS Power Front Seat 3 Backrest Adjustment Twist the switch (3) forward or backwards until the desired angle is achieved. 4 Lumbar Support Adjustment Rotate the handwheel (4) to adjust. Heating Front Seat 　 Pressing these buttons will activate the driver’s and passenger’s heated seats.
Page 105: Folding The Rear Seats
• If the seat is heated up to 45℃ and continues getting hotter when using seat heating system, please turn off seat heating and contact MG Authorised Repairer. • Overuse of the driver's heated seat may cause drowsiness and could therefore affect safety.
Page 106 SEATS AND RESTRAINTS Rear Seat Backrests ‘Latch Secure’ Indicators When returning the seat to the upright position, ensure that the catches are engaged and that the red strip is not visible - this confirms that the backrest is secure. Note: When returning the seat to the upright position, ensure that the seat belts are not trapped.
Page 107: Seat Belts
SEATS AND RESTRAINTS Seat Belts IMPORTANT • DO make sure all passengers are securely strapped Safety Information in at all times - even for the shortest journeys. The airbag supplementary restraint system • ALWAYS adjust seat belts to eliminate any slack in (SRS) is designed to add to the overall the webbing.
Page 108: Fastening The Belt
SEATS AND RESTRAINTS Fastening the Belt IMPORTANT Do not attach any additional device to the • DO NOT use a seat belt that is twisted or seat belt in any way which may impede its obstructed in any way that could impede its smooth operation.
Page 109: Releasing The Belt
- the mechanism must lock automatically and prevent any further unreeling. If a seat belt should fail any of these tests, contact your MG Authorised repairer for inspection at the earliest opportunity. Press the handle and raise or lower the seat belt upper...
Page 110: Replacing Seat Belts
SEATS AND RESTRAINTS Replacing Seat Belts The seat belt pre-tensioners are located inside the front seat belt reels. Always replace a seat belt assembly where the webbing shows signs of fraying. The airbag warning light on the instrument panel will alert the driver to any malfunction of the seat belt pretensioners Regularly inspect the belt webbing for signs of fraying, cuts (see ‘Airbag Warning Light and Messages’).
Page 111: Airbag Supplementary Restraint System
SEATS AND RESTRAINTS Airbag Supplementary Restraint System Airbags The airbag SRS provides ADDITIONAL protection in a severe impact only. It does not replace the need to wear a seat belt. The SRS system incorporates front and side airbags and side head impact protection airbags for both the driver and front seat passenger.
Page 112 SEATS AND RESTRAINTS Provided the front seat occupants are correctly seated Airbag Deployment and with seat belts properly worn, the airbags will provide To minimise the risk of accidental injury additional protection to the chest and facial areas in from inflating airbags, seat belts should be the event of the car receiving a severe frontal impact.
Page 113 SEATS AND RESTRAINTS a result of a collision. Deployment of the airbag is not dependant on the amount of damage to the vehicle. In the case of a severe frontal collision, both front airbags will be deployed. In the case of a severe side collision, only the side airbag and side head impact protection airbag on the impact side of the vehicle will inflate.
Page 114 SEATS AND RESTRAINTS Front Seat Side Airbags IMPORTANT Ensure sufficient distance exists between • Obstructions between an airbag and the occupant the driver and front passengers’ torsos and may affect the correct deployment of the airbag. the side of the vehicle to ensure correct Obstructions must not interfere with the airbag deployment of the front side airbags.
Page 115 If any of the following symptoms occur, the system should car receiving a severe side impact. It will not be deployed be inspected by your MG Authorised Repairer. in the event of a front or rear impact. • The warning light fails to illuminate when the ignition is...
Page 116 • The removal or replacement of an airbag module • the front or side of the vehicle is damaged (even if the must be carried out by an MG Authorised Repairer. corresponding airbag has not inflated). • After 10 years from the initial date of registration •...
Page 117 SEATS AND RESTRAINTS Disabling the Passenger Airbag The airbag disable switch is located on the end of the dashboard. To disable the passenger airbag, insert the The Passenger Airbag should only be disabled emergency key blade contained within the handset. To when a rear facing child seat is fitted to the remove the emergency key from the handset refer to the front passenger seat.
Page 118: Child Restraints
SEATS AND RESTRAINTS Child Restraints Children must be secured in the vehicle in a child restraint system appropriate for weight and size. DO NOT put the child on the lap or in arms when sitting in any seat. Child Restraint Instructions It is recommended that children below the age of 12 years old should be seated on the rear seat of the vehicle, in a child restraint system appropriate to the children's weight...
Page 119 SEATS AND RESTRAINTS it is recommended that you choose restraint systems Note: Some rear facing child restraint system appropriate to the child’s age and weight. installations in the rear seat may require forward adjustment of the front seat. It is important to comply with installation instructions supplied by the child restraint manufacturer and that child Note: Seat head restraints may need to be adjusted or restraint system is properly secured to the vehicle.
Page 120 SEATS AND RESTRAINTS IMPORTANT • It is recommended that a child restraint system that complies with UN ECE R44 standard are fitted in this vehicle. Check markings on the child restraint system. • It is recommended that children should always be seated in the rear of the vehicle in a child restraint system.
Page 121 SEATS AND RESTRAINTS Approved Child Restraint Positions (for Non-ISOFIX Child Restraints) If vehicle is not equipped with passenger airbag disable switch, rearward facing child restraints MUST NOT be installed on the front passenger seat. Approved Child Restraint Positions (for Non-ISOFIX Child Restraints) Seating Positions Front Passenger With Passenger...
Page 122 SEATS AND RESTRAINTS Approved Child Restraint Positions (for ISOFIX Child Restraints) ISOFIX Positions Weight Group Size Class Fixture Rear Outboard ISO/L1 Carrycot ISO/L2 0 (up to 10 kg) ISO/R1 IUF, IL ISO/R1 0+ (up to 13 kg) ISO/R2 ISO/R3 ISO/R2 ISO/R3 I (9 to 18 kg) ISO/F2...
Page 123 SEATS AND RESTRAINTS ISOFIX Positions Weight Group Size Class Fixture Rear Outboard III (22 to 36 kg) IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this mass group. IL = Suitable for particular ISOFIX child restraint systems (CRS) given in the attached list. These ISOFIX CRS are those of the ‘specific vehicle’, ‘restricted’...
Page 124 SEATS AND RESTRAINTS List of Approved Child Restraints Systems Weight Group Size class CRS name Fixture Type Category Britax Baby Safe Plus with 0+ (up to 13 kg) ISO/R1 Rear Facing Semi-universal support seat frame Britax Duo Plus with I (9 to 18 kg) ISO/F2X Forward Facing Universal...
Page 125 SEATS AND RESTRAINTS • Fasten the Top-tether of the child restraint system to the anchor at the rear of the rear passenger seat backrest. Note: When using seat mounting, universally approved child restraint systems, Top-tether must be used. Note: Please refer to the child restraint system manufacturer's instructions for details.
Page 126: 122 Starting And Driving
Starting and Driving 112 Handsets 150 Intelligent Stop/Start System 116 Child-Proof Locks 153 Parking Aid System 117 Alarm System 155 Load Carrying 122 Starting and Driving 126 Economical and Environmental Driving 130 Diesel Particulate Filter 132 Fuel System 136 6-Speed Manual Transmission 137 Brake System 144 Stability Control System and Traction Control System...
Page 127: Handsets
STARTING AND DRIVING Handsets The handsets supplied with your car are programmed to your security system. If a handset has not been Introduction programmed according to your car, it cannot start the engine. Please keep the spare handset in a safe place The remote handsets only work within a certain range.
Page 128: Handset Battery Removing And Refitting
STARTING AND DRIVING If your handset is lost/stolen or broken, a replacement can be obtained only from MG Authorised Repairer. The lost/stolen handset can be deactivated. If the lost handset is found, MG Authorised Repairers can reactivate it. Note: Replacement handsets are only available via MG Authorised Repairer.
Page 129 STARTING AND DRIVING 3 Note the location of circuit board，remove the circuit IMPORTANT board (4) from the handset. • Use of inappropriate battery may damage the handset. The new replacement’s rated voltage, sizes 4 Use a screwdriver to prise the battery (3) from its and specifications must be the same with the old mounting, taking care to avoid touching the circuit one.
Page 130: Emergency Key
STARTING AND DRIVING Emergency Key IMPORTANT Take great care when removing the plastic bung to ensure that the emergency key does not fall out. Once the door has been opened in this way, the handset must be inserted into the docking station, within 15 seconds to avoid the alarm sounding.
Page 131: Child-Proof Locks
STARTING AND DRIVING Child-Proof Locks • Turn the slot to the required position (B). Note: Turn clockwise for right rear door, and turn NEVER leave children unsupervised in the anti-clockwise for left rear door to enable. Turn back car. to the vertical position to disable. With the child-proof locks engaged, the rear doors cannot be opened from inside the car, but can be opened from outside the car.
Page 132: Alarm System
STARTING AND DRIVING Alarm System Locking the Car and Arming the Alarm Lock Your car is fitted with an electronic antitheft alarm 1 Close the doors, bonnet and boot/tailgate. and engine immobilisation system. In order to ensure maximum safety and operation convenience, we strongly 2 Press the lock button once to arm the alarm (protects recommend that you read this chapter carefully, the doors, bonnet and boot/tailgate).
Page 133 STARTING AND DRIVING However, the ‘partial arming’ attributes of the security The alarm indicator is displayed as a red exclamation mark system will enable as much of the system to be armed in a circle. This provides information about the status of as possible (all fully closed doors, bonnet or boot/tailgate the alarm system, see below: apertures will be protected, but an open door will not!).
Page 134 STARTING AND DRIVING • Press the unlock button twice to disarm the alarm and Press the lock button on the handset for more than 2 unlock all the doors and the boot lid/tailgate. In either seconds to close all the open windows. case, the direction indicator lights flash once and the When the windows are in operation, press any other interior lights illuminate.
Page 135 STARTING AND DRIVING When the alarm system is disarmed, Press the interior All doors are automatically unlocked when the handset is locking switch (1) to lock, and press the interior unlocking removed from the docking station switch (2) to unlock. Note: The interior locking/unlocking switch will not work if the alarm system is armed, in this case the alarm will sound.
Page 136: Tailgate
STARTING AND DRIVING Tailgate Press and hold the unlock button (B) for more than 2 seconds to open the tailgate. Meanwhile, the interior tailgate lights illuminate. When the car is fully unlocked, the tailgate can be opened by pressing the release button (A).
Page 137: Starting And Driving
STARTING AND DRIVING Starting and Driving The docking station is located at the instrument panel, left of the steering column and uses the following sequence to Docking Station initiate the ignition and start the engine. DO NOT remove or touch the handset while Position Ⅰ...
Page 138: Starting The Engine
STARTING AND DRIVING Starting the Engine The message ‘Fully Press Clutch’ will appear in the Message Centre, when attempting to start the engine when the NEVER start or leave the engine running in clutch pedal is not pressed. an unventilated building - exhaust gases are In the case of a fault with the clutch pedal switch, the poisonous and contain carbon monoxide, brake pedal must be pressed instead and a warning is given.
Page 139: Driving
STARTING AND DRIVING Driving 4 Insert the handset into the docking station and press it to Position Ⅲ, then release the handset as soon as In the interest of fuel economy, it is advisable to drive the engine has started. the vehicle as soon as possible after starting.
Page 140 STARTING AND DRIVING enables the cooling system to work continuously to lower the engine temperature.
Page 141: Economical And Environmental Driving
STARTING AND DRIVING Economical and Environmental Driving Driving Style The way in which you drive your car has a significant Running-in bearing on environmental pollution, as well as affecting the The engine, transmission, brakes and tyres need time to amount of fuel you use. ‘bed-in’...
Page 142: How To Save Fuel And Extend The Life Of The Vehicle
• Avoid continuous acceleration or deceleration. Your MG6 is equipped with Brake Disc Wiping, activated stop-go driving style will consume more fuel. by the wipers or rain sensor (where fitted). This will help...
Page 143 • Avoid driving on mud or beaches. This will prevent corrosion of the vehicle underside. • Maintain the vehicle in accordance with MG recommendations. Dirty air filters, oil etc., will reduce the engine's performance and raise fuel consumption.
Page 144: Maintenance
STARTING AND DRIVING Maintenance Have the vehicle regularly serviced Regularly servicing will ensure optimum fuel consumption and minimise exhaust pollutants, as well as effectively extending the service life of the car. Check tyre pressures regularly Under-inflated tyres increase the rolling resistance of the car which, in turn, increases fuel consumption.
Page 145: Diesel Particulate Filter
When driving, you should pay attention to the following points: • Do not continue to operate the starter after a few failed attempts, seek MG Authorised Repairer. • Do not operate the starter if an engine misfire is suspected and do not attempt to clear a misfire by...
Page 146: Driving
• Do not stop the engine when the car is in motion with a gear selected. • Seek MG Authorised Repairer if you think your car oil consumption is abnormal. • If a misfire is suspected, or the car lacks power while...
Page 147: Fuel System
STARTING AND DRIVING Fuel System Fuel Filler Fuel Requirements Diesel fuel specification: Diesel to EN 590. • Minimum Cetane Rating is 49; • Maximum Biofuel Content is 7.5%. Safety on the Forecourt Vehicle fuel gases are highly flammable and, in confined spaces, are also extremely explosive.
Page 148: Fuel Filling
STARTING AND DRIVING Fuel Filling Emergency Fuel Filler Release DO NOT fully fill the tank if the vehicle is to be parked in direct sunlight, or high ambient temperature - expansion of the fuel could cause spillage. The diesel filler tube is designed to accept a wider diesel nozzle.
Page 149: Inertia Switch
Note that water/diesel emulsion should not be discharged to ground. After refuelling, if the engine runs unevenly, switch off and seek an MG Authorised Repairer before attempting to restart the engine. In the event of a collision or sudden impact, the inertia switch automatically cuts off the fuel supply to the engine, unlocks the doors and turns the interior lights on.
Page 150 STARTING AND DRIVING addition, the hazard warning lights flash. An Inertia Switch Tripped message will appear in the message centre. The inertia switch is located behind the drivers storage box, and can be reached by fully lowering the stowage box. The switch must be reset before the engine can be started.
Page 151: 6-Speed Manual Transmission
STARTING AND DRIVING 6-Speed Manual Transmission Precautions When Driving: 1 When switching between forward gear and reverse gear, you must ensure that the vehicle is completely in Gear Lever stationery, wait for a moment and then fully depress the clutch pedal, push the shift lever into neutral position, press the lever down and push it leftward, then push it forward into the reverse position, slowly release the clutch pedal to complete the gear shift.
Page 152: Brake System
If one circuit should fail, the other conditions. Contact an MG Authorised Repairer. will continue to function, but greater pedal pressure will be needed, and increased brake pedal travel, and longer •...
Page 153 Do not exit the vehicle with only HHC occurs, stop the car as soon as safety permits and seek applied, it may lead to a serious accident an MG Authorised Repairer immediately. DO NOT drive when HHC enable. the car with the brake system warning light illuminated.
Page 154: Anti-Lock Brake System (Abs)
STARTING AND DRIVING Anti-lock Brake System (ABS) in the braking system for 2 seconds. After this, the Hill Hold will release. cannot overcome physical HHC assists the driver by 'holding' the vehicle during hill limitations of stopping the car in too short starts.
Page 155 STARTING AND DRIVING Braking in an Emergency However, should the braking force exceed the available adhesion between the tyres and the road surface causing DO NOT pump the brake pedal at any time; the wheels to lock (on slippery roads, for example), then this will interrupt operation of the ABS and ABS will automatically come into operation.
Page 156: Electric Park Brake (Epb)
STARTING AND DRIVING Electric Park Brake (EPB) No matter how hard you brake, you should be able to continue steering the vehicle as NORMAL. In the event of EPB malfunction where the EPB release is not possible, DO NOT tow ABS Warning Light.
Page 157 • If the EPB failure warning lamp in the instrument pack illuminates, it indicates that a fault has been detected. Please contact an MG Authorised Repairer immediately. Note: An audible motor noise may be heard when applying or releasing the EPB.
Page 158 STARTING AND DRIVING • If the indicator in the EPB switch and the indicator During emergency braking using the EPB, DO in the instrument pack are extinguished, the EPB is NOT insert or remove the ignition key, this released. could result in serious injury. Start Assist In the event of normal brake failure, emergency braking The EPB can predict the driver's intention and...
Page 159: Stability Control System And Traction Control System
STARTING AND DRIVING Stability Control System and Traction torque to the opposite, non-spinning wheel. If both wheels Control System are spinning, the system will reduce engine speed in order to regulate wheel rotation until traction is regained. Stability Control System (SCS) Note: The individual wheel braking feature of the SCS is designed to assist the driver in control of driving traction control system will not operate at road...
Page 160: Switching On And Off
STARTING AND DRIVING Switching On and Off • Press the SCS switch (more than 2 seconds). TCS and SCS are both disabled. The traction control System indicator will illuminate and Traction Control Off and the TCS icon will appear in the message centre, followed by the message Stability Control System Off and the SCS icons displayed.
Page 161: Tyre Pressure Monitoring System (Tpms)
STARTING AND DRIVING Tyre Pressure Monitoring System Check your tyres at the earliest opportunity and reinflate (TPMS) to the correct pressures. Refer to ‘Tyre Pressures (Cold)’. Note: When a puncture is detected, the system will The TPMS is not a substitute for checking require some time to analise information prior to tyre condition and pressures.
Page 162 STARTING AND DRIVING • Excessive luggage weight change from when last reset carried out. • TPMS will not respond immediately if a tyre 'blows out'. Initialising TPMS If replacement tyres are fitted or tyre pressures changed, a TPMS reset is required - refer to TPMS reset in Instruments and Controls.
Page 163: Cruise Control
STARTING AND DRIVING Cruise Control journey where a constant speed can be maintained for a lengthy period. The following precautions must be observed when using cruise control： • DO NOT attempt to use cruise control when using reverse gear. • DO NOT use cruise control on winding or slippery road surfaces, in the rain, or in traffic conditions where a constant speed cannot easily be maintained.
Page 164 STARTING AND DRIVING To Change the Set Cruising Speed 3 Press the thumb wheel (2) to set the road speed in the system memory. Cruise control will now maintain that Rotate the thumb wheel upwards - the car will accelerate speed without the need to use the accelerator pedal.
Page 165: Intelligent Stop/Start System
STARTING AND DRIVING Intelligent Stop/Start System Extremely low battery power may result in the engine not re-starting automatically, or even using the handset key. In this instance, external power is needed to start the engine or the battery will require re-charging. See the section ‘Emergency Starting’...
Page 166 STARTING AND DRIVING power is not required and then automatically be restarted • Gearbox must be in Neutral. when it is. • The clutch pedal is released. • The driver’s door is closed and seat belt is secured. • The bonnet is closed. Engine Restart (From Stop/Start Control) This system defaults “on”...
Page 167 STARTING AND DRIVING shall allow the engine to auto-start without any • Engine temperature. operation. • The air conditioning system status. • The driver’s door is closed and seat belt is secured. Stop/Start Prohibited • The bonnet is closed. Stop Start will not operate if: •...
Page 168: Parking Aid System
STARTING AND DRIVING Parking Aid System to the driver by sounding warning chimes. It is important to remember that the system is no more than an AID Ultrasonic Sensor Parking Aid System to parking. It is not foolproof in operation, nor it is a substitute for observation and personal judgement.
Page 169: Rear Parking Camera
3 seconds when reverse gear is selected, this indicates reversing. a fault with the system - contact MG Authorised Repairer for assistance. While Reversing: • If an obstruction is located within the 1.5 m range of the rear parking aid sensors or 60 cm of the corner sensors, the warning commences.
Page 170: Load Carrying
STARTING AND DRIVING Load Carrying so as to avoid the cargo shift in the event of an accident or sudden stop. DO NOT exceed the gross vehicle weight or the permitted front and rear axle loads. Drive carefully and avoid emergency braking or maneuvers. Failure may result in vehicle damage or Driving with boot/tailgate open is very dangerous.
Page 171 STARTING AND DRIVING Folding the rear seats can increase luggage space, refer to ‘Fold the Rear Seat’ described in the ‘Seats and Restraints’ chapter. When cargo is loaded in the vehicle, place it at a position as low as possible and ensure that it is tightly secured, so as to avoid personal injury caused by cargo movement.
Page 172: Emergency Information
Emergency Information 158 Hazard Warning Devices 159 Emergency Starting 161 Vehicle Recovery 165 Tyre Repair 169 Fuse Replacement 179 Bulb Replacement...
Page 173: Hazard Warning Devices
EMERGENCY INFORMATION Hazard Warning Devices Warning Triangle Hazard Warning Lights The warning triangle supplied with your car is stowed in the loadspace. If you have to stop your car on the road in an emergency, Before you stop or slow the car in an emergency, always you must place a warning triangle approximately 50 to 150 press the hazard warning switch.
Page 174: Emergency Starting
EMERGENCY INFORMATION Emergency Starting Starting the Vehicle Ensure that each booster cable connection is Using Booster Cables securely made. There must be no risk of the clips accidentally slipping from the battery NEVER start the engine by pushing or towing. terminals (as a result of engine vibration, for example), this could cause sparking, which could lead to fire or explosion.
Page 175 EMERGENCY INFORMATION Remove the ignition handset and switch off ALL electrical 3 Now start the engine of the vehicle with the equipment of BOTH vehicles, then follow the instructions discharged battery (DO NOT crank the engine for below: more than 10 seconds). 1 Connect the RED booster cable between the positive 4 Once both engines are running normally, allow them （...
Page 176: Vehicle Recovery
EMERGENCY INFORMATION Vehicle Recovery Towing for Recovery Towing Eye DO NOT use a tow rope that is twisted - any untwisting force could unscrew the front towing eye.
Page 177 EMERGENCY INFORMATION Towing for Recovery Your car is equipped with a removable towing eye, that can be used at the front or the rear of your vehicle. The DO NOT remove the ignition handset while towing eye is stored in the tool kit beneath the loadspace the car is being towed on four wheels –...
Page 178 EMERGENCY INFORMATION Without the engine running, greater effort will be required Note: When towing the maximum gross vehicle weight to operate the brake pedal and turn the steering wheel. can be increased by up to 100 kg(221 lbs), provided Longer stopping distances will also be experienced. Whilst road speed is limited to a maximum of 62 MPH (100 towing for recovery DO NOT exceed 30MPH(50km/h) km/h)
Page 179: Transporter Or Trailer With Rope
EMERGENCY INFORMATION Transporter or Trailer with Rope Fit the lashing straps(3)around the wheels and secure to the trailer. Tighten the straps until the car is securely held. If your car is to be transported on the back of a trailer or transporter, it must be secured as illustrated: Position the car on the trailer, apply the park brake and place the gear lever in neutral.
Page 180: Tyre Repair
EMERGENCY INFORMATION Tyre Repair Tool Identification 1 Electric air compressor 2 Wheel bolt cap removal tool. 3 Tyre repair sealant 4 Towing hook...
Page 181: Tyre Repair
EMERGENCY INFORMATION Tyre Repair Schematic Diagram of Tyre Repair...
Page 182 EMERGENCY INFORMATION 1 Remove the sticker on the Tyre Sealant Bottle and Note: The tyre sealant bottle will become empty attach it to the steering wheel to remind the driver after approximate 30 seconds. not to exceed 50 MPH (80 km/h). (Figure 1) 6 The tyre should reach the specified inflation pressure 2 Connect the air hose of the electric compressor to the within 10 minutes.
Page 183 50MPH (80KPH). Note: DO NOT remove foreign objects (eg. screws,nails) from the tyre. At the earliest opportunity get the tyre replaced by a dealer or tyre specialist and replace the used tyre sealant bottle with an MG approved sealant. (Figure 11，12)
Page 184: Fuse Replacement
Check a suspect fuse by removing it from the fuse box and looking for a break in the wire inside the fuse. IMPORTANT • Only replace a fuse with one of the same rating. • If a replaced fuse fails immediately, refer the problem to an MG Authorised Repairer.
Page 185: Passenger Compartment Fuse Box
EMERGENCY INFORMATION Fuse Boxes Passenger Compartment Fuse Box There are 4 fuse boxes in the vehicle: 1 Passenger Compartment Fuse Box (located behind the glove box) 2 Auxiliary Fuse Box (located on the left side of the bulkhead in engine compartment) 3 Battery Top Fuse Box (located on the battery) 4 Engine Compartment Fuse Box (located in the engine compartment)
Page 186 EMERGENCY INFORMATION 4 For a blown fuse, replace it with a same rating. Fuse Specification Code Rating Function Spare Front Power Socket Reverse Lamps, Interior Mirror, Camera Spare Heated Mirror Inertia Switch Checking or Renewing Fuses Rear Accessory Socket 1 Turn off the ignition switch and all electrical equipment. Power Supply - Window Lift Front - LH Disconnect the battery negative cable.
Page 187 EMERGENCY INFORMATION Code Rating Function Code Rating Function Power Supply - Window Lift Front - RH Side Lamp - LH, Tail Lamp - LH, Rear Spare Number Plate Lamps Heater Rear Window Switch - EPB Switch - Ignition Switch - Steering Wheel Remote Spare ESCL ECU Spare...
Page 188 EMERGENCY INFORMATION Code Rating Function Diagnostic Socket Lamp - Glovebox Driver Door Locks, Motor - Fuel Flap Release, Tailgate Release Motor Relay, Motor - Tailgate Release Spare Rear Fog Lamps Airbag ECU Spare Interior Mirror, Rain Sensor, PDC ECU Multifunction Control Switch, Master Light Switch, Driver Door Switch Pack, Navigation Display Power Power Supply - Window Lift Rear - RH...
Page 189: Auxiliary Fuse Box
EMERGENCY INFORMATION Auxiliary Fuse Box Fuse Specification Code Rating Function DC/DC Convertor Relay - Electric Water Heater 1, Electric Water Heater Element 1 Headlamp Wash System Relay - Fuel Heater, Fuel Heater AFS System Interior Lamp - Front, Interior Lamp - Rear, Lamp - Vanity Mirrors Entertainment System A/C Control Panel, Fresh/Recycle...
Page 190: Battery Top Fuse Box
EMERGENCY INFORMATION Battery Top Fuse Box Fuse Specification Code Rating Function EPB ECU EPB ECU Auxiliary Fuses 1, 2, 3, 4, 5, Relay 125A - Electric Water Heater 2, Electric Water Heater Element 2 Control Unit Glow Plug 450A Motor - Starter Relay - Electric Water Heater 3, Electric Water Heater Element 3...
Page 191: Engine Compartment Fuse Box
EMERGENCY INFORMATION Engine Compartment Fuse Box Fuse Specification Code Rating Function Sensor - Wide Band, Control Unit - Glow Plug, ECU - Engine, Switch - Clutch Pedal Power Supply - Fuel Filter, Bypass - EGR Cooling, Actuator - Variable Swirl, Valve - Throttle Actuator, Sensor - Hot Film Airmass, Variable Geometry Turbo Controller...
Page 192 EMERGENCY INFORMATION Code Rating Function Code Rating Function Lamp - Direction Indicator Front - LH, Alternator, Engine Compartment Fuse 200A Lamp - Direction Indicator Rear - LH, Links 2, 7,10 and Fuses 5, 8, 9 Lamp - Side Repeater - LH, Relay - Passenger Compartment Fuses 1, 6, 9, Reverse Lamp, Relay - Position Lamp, 22, 24, 25, 27, 28, 42, Relay - Switched...
Page 193 EMERGENCY INFORMATION Passenger Compartment Fuses 2, 5, 10, 13, 14, 15, 26, 38, 44, Relay - Heated Rear Screen, Relay - Main Beam, Relay - Auxiliary Relay - Blower, Motor - Blower, A/C FL10 Control Panel FL11 SCS ECU (Valve) Relay - Dipped Beam, Lamp - Direction Indicator Front - RH, Lamp - Direction Indicator Rear - RH, Lamp - Side...
Page 194: Bulb Replacement
EMERGENCY INFORMATION Bulb Replacement Bulb Specification Bulb Type Bulb Type Headlamp dipped beam H7 55W Courtesy lamp W5W 5W Headlamp main beam H7 55W Rear indicators WY21W 21W Xenon headlamp D3S 35W Glovebox lamp T5 1.2W Cornering lamp H7 55W Loadspace lamp C10W 10W Direction indicators...
Page 195: Replacing Bulbs
EMERGENCY INFORMATION Replacing Bulbs Front Courtesy & Map Reading Lamp Before replacing any bulb, switch off the ignition switch and turn off the lighting switch to avoid any possibility of a short circuit. Note: Only replace bulbs with the same type and specification.
Page 196 EMERGENCY INFORMATION Rear Courtesy Lamp locate the two prongs at the rear of the lens into the light unit. Push the lens upwards until it ‘clicks’ into position. 1 Use a small flat-bladed screwdriver to gently prise the lens from the light unit. 2 Pull the bulb from its mounting to remove.
Page 197 EMERGENCY INFORMATION Glovebox Lamp Loadspace Lamp 1 Reach behind the glovebox lamp and press it from its 1 Insert a small flat-bladed screwdriver into the indent housing. on one of the narrow sides of the lens (see arrow 2 Pull the bulb from the bulb holder to remove. in illustration) and carefully press the unit from its Push the new bulb into the bulb holder, then press the location.
Page 198 EMERGENCY INFORMATION Replacement of the bulb is a reversal of the removal process.
Page 200: Maintenance
Maintenance 186 Routine Servicing 190 Bonnet 191 Engine Compartment 192 Engine 195 Cooling System 197 Brakes 199 Power Steering 201 Battery 205 Washers 207 Wipers 209 Tyres 214 Cleaning and Vehicle Care...
Page 201: Routine Servicing
Your depend partly on how well it is maintained. MG Authorised Repairer will replace the brake fluid at the You must ensure that maintenance is carried out when service nearest to the conclusion of each two year period.
Page 202 • Power steering fluid level. without delay. For further information, refer • Screen washer fluid level. to a MG Authorised Repairer. • Tyre pressures and condition. • Operate air conditioning. In addition to the routine services referred to previously,...
Page 203 - exhaust gases are poisonous and extremely dangerous. operations may be required (refer to ‘Warranty and • DO NOT work underneath the car with a wheel Maintenance Manual’) or contact your MG Authorised changing jack as the only means of support. Repairer.
Page 204 MAINTENANCE These include: battery acid, antifreeze, brake and power steering fluid, petrol, diesel, engine oil and windscreen washer additives. For your own safety, ALWAYS read and obey all instructions printed on labels and containers. Used Engine Oil Prolonged contact with engine oil may cause serious skin disorders, including dermatitis and cancer of the skin.
Page 205: Bonnet
MAINTENANCE Bonnet 2 Push the lever (B) mounted on the bonnet upward to release the bonnet safety catch. Opening the Bonnet 3 Raise the bonnet and release the lever. DO NOT drive when the bonnet is retained Closing the Bonnet only by the safety catch.
Page 206: Engine Compartment
MAINTENANCE Engine Compartment While working in the engine compartment, always observe the safety precautions listed under ‘Safety In The Garage’. 1 Windshield washer reservoir (blue cap) 2 Cooling system reservoir (black cap) 3 Brake reservoir (yellow cap) 4 Lamp washer reservoir (blue cap) 5 Power steering reservoir (black cap) 6 Engine oil filler (yellow cap) 7 Engine oil dipstick (yellow)
Page 207: Engine
MAINTENANCE Engine Diesel Engine Oil ACEA Specification Use engine oil meeting ACEA specification C3, to ensure optimum protection for your engine, alternatively seek advice from the manufacturer. Choose a different viscosity of oil according to the ambient temperature in which your vehicle is operating. If temperature range is minimal continue using the original viscosity oil.
Page 208 MAINTENANCE Diesel Engine Oil Level Check and Top Up Check the oil level weekly and top up with oil if necessary. Ideally the oil level should be checked with the engine cold Driving the car with the engine oil level and the car resting on level ground.
Page 209 MAINTENANCE IMPORTANT Check the engine oil more frequently if the car is driven at high speeds for prolonged periods.
Page 210: Cooling System
If the coolant level falls appreciably during a short period, DO NOT remove the reservoir cap when the suspect leakage or overheating and arrange for a MG cooling system is hot - escaping steam or Authorised Repairer to examine the car.
Page 211: Coolant Specification
MAINTENANCE Coolant Specification Antifreeze Please use the coolant (mix of water and antifreeze) which Antifreeze is poisonous and can be fatal is recommended and certified by the manufacturer. Please if swallowed - keep containers sealed and refer to ‘Recommended Fluids and Capacities’. out of the reach of children.
Page 212: Brakes
When a brake pad wears to a predetermined point, please possible. Do not allow the level to drop below the ‘MIN’ seek MG Authorised Repairer to replace brake pads, loss mark. of brake efficiency may result which may result in a serious injury or accident.
Page 213: Brake Fluid Specification
MAINTENANCE Brake Fluid Specification Use the brake fluid which is recommended and certified by the manufacturer. See ‘Recommended Fluids and Capacities’. IMPORTANT The brake fluid must be replaced every two years.
Page 214: Power Steering
MAINTENANCE Power Steering between the upper and lower marks on the dipstick (see illustration). Power Steering Fluid Check and Top Up Power steering fluid is highly toxic - keep containers sealed and out of the reach of children. If accidental consumption of fluid is suspected, seek medical attention immediately.
Page 215: Power Steering Fluid Specification
MAINTENANCE IMPORTANT Take care not to spill power steering fluid on to a hot engine, a fire may result. Power Steering Fluid Specification Use the power steering fluid which is recommended and certified by the manufacturer. Refer to ‘Recommended Fluids and Capacities’.
Page 216: Battery
To access the battery, release the fixings and move the top engine is running. of the battery cover aside as shown in illustration. Batteries contain sulphuric acid, which is both corrosive and poisonous. If a battery requires replacement contact an MG Authorised Repairer. Only fit a replacement...
Page 217 . They should be recycled by a professional the starter switch and all electrical equipment is turned off. company. Please consult an MG Authorised Repairer for more details. Disconnect the negative (-) cable first and then the positive (+) cable (when reconnecting, connect the positive cable first and then the negative cable).
Page 218: Battery Charging
MAINTENANCE Battery Charging Charging Notes: • Always wear safety glasses when connecting or Note: DO NOT charge the battery if it is suspected of disconnecting a battery charger. being frozen. • Always ensure there the area is well ventilated. Ensure As the battery ages, it may not retain its charge as the charging battery has adequate space and does not effectively as when it was new.
Page 219: Battery Maintenance
MAINTENANCE • Only suitable battery chargers can be used - please battery condition. Failure to adhere to this will inhibit consult an MG Authorised Repairer for details. the stop/start functionality. • During the charging process the battery temperature MUST NOT exceed 40ºC.
Page 220: Washers
MAINTENANCE Washers Windscreen and Front Lamp Washer Check and Top Up Some screen and front lamp wash products are flammable, particularly if high or undiluted concentrations are exposed to sparks. Do not allow screenwash to come into contact with naked flames or sources of ignition.
Page 221: Washer Nozzles
MAINTENANCE IMPORTANT The front lamp washer nozzles can not be configured. If the nozzle is obstructed, insert a needle or thin metal • Use the washer fluid which is recommended by the wire into the hole to remove the obstruction. manufacturer, or the washer motor may become damaged by freezing if non-recommended washer Washing Fluid Specification...
Page 222: Wipers
MAINTENANCE Wipers Windscreen Wiper Blades IMPORTANT • Grease, silicon and petrol based products impair the blade’s wiping capability. Wash the wiper blades in warm soapy water and periodically check their condition. • Clean the windscreen frequently, DO NOT use wipers to remove stubborn or ingrained dirt, it will reduce their effect and their life span.
Page 223: Replacing Front Wiper Blades
MAINTENANCE Replacing Front Wiper Blades 5 Pivot the wiper blade towards the arm until the locating tags engage. 6 Check that the blade is fitted correctly to the arm before positioning on the windscreen. 1 Lift the wiper arm away from the windscreen. 2 Squeeze the two locating tags and pivot the blade away from the wiper arm.
Page 224: Tyres
500 km. This action could benefit tyre life. Tyre or rim damage can happen unnoticed. If abnormal vibrations or handling is experienced, or you think tyre or rim damage has occurred please contact an MG Autorised Repairer.
Page 225: Tyre Life
Incorrect wheel alignment can cause excessive tyre wear and affect vehicle safety. If the tyres show signs of abnormal The following factors can affect the tyre life. wear seek advice from an MG Authorised repairer. Tyre Pressures Incorrect tyre pressures can result in poor driving characteristics and a shortened tyre life.
Page 226: Caring For Your Tyres
MAINTENANCE Caring for Your Tyres let air out of the tyres in order to match the recommended pressures (cold). DEFECTIVE TYRES ARE DANGEROUS! DO NOT drive if any tyre is damaged, Valves is excessively worn, or is inflated to an Keep the valve caps screwed down firmly - they prevent dirt incorrect pressure.
Page 227: Tyre Wear Indicators
MAINTENANCE Tyre Wear Indicators IMPORTANT A tyre MUST be replaced as soon as a wear indicator Tyres fitted as original equipment have wear indicators becomes visible. moulded into the tread pattern at several points around the circumference. Replacement Tyres DO NOT replace the wheels with wheels of any other type.
Page 228: Snow Chains
Directional tyres CANNOT be swapped from side to side. Note: If you drive on the snowy and icy roads, it is recommended to use winter tyres. Consult an MG Authorised Repairer for details.
Page 229: Cleaning And Vehicle Care
MAINTENANCE Cleaning and Vehicle Care If the car is particularly dirty, use a hose to flush grime and grit from the bodywork, prior to washing. Then, wash the Observe all safety precautions on cleaning car using cold or lukewarm water containing a good quality products;...
Page 230 Failure to do this will invalidate the Wash in warm soapy water. DO NOT use spirit or petrol based cleaners. Anti-Corrosion Warranty. If in doubt, ask your MG Authorised Repairer. Windows and mirrors Polishing the paintwork Regularly clean all windows, inside and out, using an approved glass cleaner.
Page 231: Cleaning The Interior
MAINTENANCE Cleaning the Interior Note: DO NOT scrape or use abrasive cleaners on the inside of the rear screen – this will damage the heating Plastic materials elements. Clean plastic-faced materials with diluted upholstery Mirrors: Wash with soapy water. Use a plastic scraper to cleaner, then wipe with a damp cloth.
Page 232 MAINTENANCE Instrument pack, clock, audio system and Extend the belts, then use warm water and a non-detergent soap to clean. Allow the belts to dry naturally; DO NOT navigation display retract them or use the car unitl they are completely dry. Clean with a dry cloth only.
Page 234: Technical Data
Technical Data 220 Technical Data Dimensions 221 Weights 222 Major Parameters of Engine 223 Recommended Fluids and Capacities 224 Wheel Alignment (Unladen Condition) 224 Wheel and Tyre 224 Tyre Pressures(Cold)
Page 235: Technical Data Dimensions
TECHNICAL DATA Technical Data Dimensions Item, units Parameter Item, units Parameter Overall length A, mm 4657 Front wheel track, mm 1557 Overall width B, mm 1827 Rear wheel track, mm 1555 Minimum turning circle Overall height C (unladen), mm 1467 11.8 diameter, kerb-to-kerb 2705...
Page 236: Weights
TECHNICAL DATA Weights Parameter Item, units Person in cab, person Diesel models unladen vehicle 1521 1525 1539 weight (kerb), kg 2140 （ Diesel ） Gross vehicle weight, kg Towing Weights Parameter Item, units D1.9 Towing limit un-braked, kg Towing limit braked, kg 1600 Towing hitch maximum download, kg...
Page 237: Major Parameters Of Engine
TECHNICAL DATA Major Parameters of Engine Vehicle Item, units D1.9 Bore × Stroke, mm × mm 80 × 92 Capacity, l 1.850 Compression ratio 15.8:1 Maximum power, kw Engine speed to develop maximum power, rev/min 4000 Maximum torque, Nm Engine speed to develop maximum torque, rev/min 1800 - 2600 Idle speed, rev/min 800 ±...
Page 238: Recommended Fluids And Capacities
TECHNICAL DATA Recommended Fluids and Capacities Name Fluid Type Capacity Engine oil, l C3 5W-30 Engine coolant, l Glycol (OAT) Transmission Fluid, L MTF 94 Brake fluid, l DOT 4 0.55 Power steering fluid, l Pentosin CHF 202 Windshield washer fluid, l Qx35 Headlamp washer fluid, l Qx35...
Page 239: Wheel Alignment (Unladen Condition)
TECHNICAL DATA Wheel Alignment (Unladen Condition) Tyre Pressures(Cold) Item Parameter All load conditions Wheel 205/60 R16 Camber angle -0°28¢±45¢ 2.2bar Castor angle 3°37¢±45¢ Front Wheel (32psi) Front Total toe 0°10¢±6¢ 2.2bar Rear King pin inclination 12°54¢±45¢ Wheel (non adjustable) (32psi) Camber angle -1°10¢±45¢...
Page 240 AUTO lights 34 AUTO air conditioning 67, 68 ABS (Anti-lock braking system) 30, 139, 141, 145 Auto store - audio controls 80-81 ABS warning light 30, 141 AUX devices - audio 78, 81, 82 Average fuel consumption 17, 19, 24 Accessory power socket 53 Adaptive Frontlighting System (AFS) 14, 25, 36 Average speed 17, 19, 21...
Page 241 Braking in an Emergency 140 Current journey 17, 19, 20 Bulb replacement 179-183 Bulb specification 179 Daily checks 187 Data - Technical 220-224 Camera - rear parking 154 Daytime Running Lamps 35 Capacities 223 Default - trip computer 24 Car washes 46, 84 Defrosting/demisting 63-68, 72, 152 CD player 76-78, 82, 84 Dial sweep 24...
Page 242 Foot brake 137 Front courtesy and reading lights 180 Ejecting a CD 77, 84 Front cup-holder 57 Ejecting USB device safely 84 Front wiper operation 40-42 Electric seats* 89 Front wiper blade replacement 208 EBA (Electronic Brake Assist) 138 Fuel consumption 17-19, 126-129 EBD (Electronic brake force distribution) 137-138 Fuel cut-off switch (inertia switch)134-135 ESCL (Electronic Steering Column Lock) 31...
Page 243 Glovebox 55 Ignition 7, 9, 10, 16, 17-18, 20, 22, 27-38, 40, 44, 45, Glovebox light bulb 179, 182 49, 51, 53, 78, 100, 113, 114 122-124, 138, 139, 142, Glow plug warning - diesel 33, 151 143, 149, 160, 162, 180, 190, 204, 205. Immobilisation 12, 117, 124 Indicators 27, 38, 39, 158, 162, 179, 187.
Page 244 Mirrors - interior 47 Mirrors cleaning 215 Lamp failure and monitoring 13, 39 Mirrors - folding 45 Language 24 Mislock 117, 118 Lap time 17, 19 MIX button - audio controls 77, 79, 83 Last journey 18, 20 MONO control - ATC 68, 70, 71 Lighting switch 7, 34 MUTE button - audio controls, 77, 79 Lights off delay 13, 23...
Page 245 Passenger air - bag disabling 102 Remote handset 12, 23, 34, 50, 51,102, 112-123, 132, Passenger compartment fuses 170-173 149, 150,160, 162, 188 Poisonous fluids/gases 123, 130, 188, 196, 201 Remote handset battery 12, 113, 114 Polishing the paintwork 215-217 Reverse light bulbs 179 Power socket 53-54 Routine servicing 186-187...
Page 246 Single point entry 22, 119 Towing for recovery precautions 161-163 Slip Control System (SCS) 29, 30, 137, 139, 143-146 Track search - audio controls 83 Snow chains 213 Traction control (TC) 29, 30, 144-145 Sound settings - audio controls 79 Transporter or trailer lashing 164 Speed warning 12, 21, 24 Transmission 3, 126, 136, 162, 223...
Page 247 Vehicle information display 11 Vehicle options 21-22 Vehicle recovery 161-164 Ventilation 60-61 VIN plate 3 Warning lights 12, 26-27, 122, 187 Warning messages and symbols 11-16 Warning triangle 158 Washer jets, fluid and top-up 187, 191, 205-206, 223 Washing the car 214 Weekly checks 187 Weights 221 Welcome lights (Find my car) 23...
Page 248 MG MOTOR UK Lowhill Lane, Longbridge, Birmingham B31 2BQ www.mg.co.uk...

MG MG6 Owner's Handbook Manual

1 Instruments and Controls

2 Air Conditioning

3 Audio System

4 Seats and Restraints

122 Starting and Driving

6 Emergency Information

7 Maintenance

8 Technical Data

Quick Links

Need help?

Questions and answers

Related Manuals for MG MG6

Summary of Contents for MG MG6