Mitsubishi Electric Apricot AL Series Owner's Handbook Manual page 63

OWNER'S HANDBOOK
Low battery beep
If this option is enabled, the computer will emit beeps
when the battery is low, as described in 'If the battery
is running out' section of Chapter 4, Battery and
Power Management.
DC mode power savings
This option contains a submenu which gives you full
control over the DC Power Management settings.
The original setting for this option is: Disabled.
AC mode power savings
This option contains a submenu which gives you full
control over the AC Power Management settings.
The original setting for this option is: Disabled.
Security function setup
The main Security options are as follows:
7 / 6 B I O S S e t u p
Set supervisor password
This option allows you to set a password which can be
used by a supervisor to access the Setup utility. Setting
this password also allows a user password to be set.
Set user password
This option allows you to set a password for a user to
access the system. If this password is set and enabled,
users will be prompted for a password before
Windows starts.
Password on boot
This option allows you to enable or disable the user
password.
IrDA setup
The infra-red facility can be configured in the I/O
Device Configuration menu which is a submenu of
the Advanced menu. You can control how the IR port
is enabled, and the mode of operation of the port. For
further information refer to the documentation which
came with your IR device, and to the Setup utility
itself.