Table of Contents
Advertisement
Changing the drive configuration
It is possible to interchange the FDD with the CD-
ROM drive. Whether you are replacing the CD-
ROM drive with the FDD, or the FDD with the CD-
ROM drive the procedure is similar:
1.
Remove any disks from the drive.
2.
Shut down the computer, and turn it off.
3.
Turn the computer upside down, with the front
facing toward you.
4.
Slide the drive securing button to the left while
gently pulling the drive outwards. The drive
should disengage from its connections. Slide the
drive out of its compartment.
5.
Put the removed drive in a safe place.
6.
Insert the other drive into the vacant
compartment, ensuring it is the correct way up.
The drives only fit one way, so if the drive only
moves so far, you are inserting it the wrong way
round. Push the drive all the way back until it
clicks into place.
D i s k e t t e s a n d C D s
OWNER'S HANDBOOK
3 / 5
Advertisement
Table of Contents
