Table of Contents
Advertisement
SETTING THE TIME:
TIME SYNC & MANUAL TIME SETTING
TIME SYNC
This unit is equipped with auto sync. By default, the unit will sync to the
time on your iPhone or iPod whenever you dock it in the Lightning dock.
When successful, the updated time will appear on the display. While the
dock accommodates most cases, you may need to remove your case for
proper docking. To manually sync at any time, press and release the Time
Sync Button. If sync is unsuccessful, try to sync again using a different
iPhone or iPod. If sync still doesn't work, set the time manually (see
below).
SETTING THE TIME MANUALLY
1.
Press and hold the Time Sync Button until "SYNC" flashes in the display
and a beep sounds. Press the + or – Buttons so "MANUAL" appears in the
display, indicating manual time setting mode.
2. Press and release the Time Sync Button. The TIME will flash on the display.
Press the + or – Buttons to set the correct time (hold for rapid
adjustment). Make sure to set the correct AM or PM time. (The PM/AM
indicators appear to the left of the time display.)
NOTE: The display can be set to standard 12 hour time (AM and PM) or to
24 hour time. To toggle between 12 and 24 modes, press and release the
Alarm 1 or
while display is flashing during manual time setting mode.
3. Press and release the Time Sync Button to confirm the current time
setting. The YEAR will flash on the display. Press the + or – Buttons to set
the correct year.
4. Press and release the Time Sync Button to confirm the current year
setting. The DATE will flash on the display. Press the + or – Buttons to set
the correct month and day (hold for rapid adjustment).
5. Press and release the Time Sync Button to confirm the current date
setting. Two beeps will sound to indicate time setting mode is complete.
Alarm 2 Button located on top of the unit at any time
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iPL24 and is the answer not in the manual?
Questions and answers
i have an old ihome ipl 24 that i **** trying to change the battery on a compartment on the bottom. i **** replacing a2450 battery. I cant get it to work. all the info i see is for a unit with batery compartrment on the back
To change the battery in an iHome iPL24 with a bottom battery compartment, follow these steps:
1. Ensure the AC adapter is connected to avoid losing settings.
2. Use a Phillips screwdriver to open the backup battery compartment door on the bottom of the unit.
3. Remove the old CR2450 battery.
4. Insert a new CR2450 battery.
5. Close the compartment door and secure it with the screwdriver.
This answer is automatically generated
How do I find an adapter to use my iPhone 16 on my old iHome iPL24?
The iHome iPL24 uses a built-in Lightning Dock Connector for iPhone or iPod. Since the iPhone 16 likely uses a USB-C port instead of Lightning, you would need a USB-C to Lightning adapter that supports charging and audio. However, compatibility is not guaranteed, and some functions like audio playback or time sync may not work properly.
This answer is automatically generated