Date Code Position; Intended Use; Electrical Safety - DeWalt DCB100 Original Instructions Manual

DATE CODE POSITION (FIG. 1)
The date code (a), which also includes the year of manufacture, is
printed into the underside of the housing.
Example:
Year of Manufacture

INTENDED USE

The DCB100 is designed for charging 10.8 V battery packs (DCB121,
DCB123).
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
These battery chargers and battery packs are professional tools.
DO NOT let children come into contact with the charger. Supervision is
required when inexperienced operators use this charger.
• This product is not intended for use by persons (including children)
suffering from diminished physical, sensory or mental abilities,
or for lack of experience and/or for want of knowledge or skills
unless they are supervised by a person responsible for their safety.
Children should never be left alone to play with this product.
• Only use rechargeable batteries with this charger.
BATTERY TYPE VOLTAGE
DCB121 10.8
DCB123 10.8

Electrical Safety

The electric motor has been designed for one voltage only. Always
check that the battery pack voltage corresponds to the voltage on
the rating plate. Also make sure that the voltage of your charger
corresponds to that of your mains.
Your D WALT charger is double insulated in accordance with
E
EN 60335; therefore no earth wire is required.
2011 XX XX
CELL CELL CAPACITY
3 x Li-Ion 1.3 A
h
3 x Li-Ion 1.5 A
h
E NGLI SH
41