Miele DA 3466 Operating And Installation Instructions page 31

a Example: Installation without a front
panel fitted and with the front edge
of the deflector plate flush with the
front edge of the furniture housing
unit.
b Example: Installation with a front
panel to match the kitchen furniture.
This installation requires dimension
b for the front panel plus 5 mm for
the DML 400 fixing bracket to be
added to the shelf dimension.
To position the rangehood correctly, cut
the spacer strip to the required depth T
and then attach it to the back of the
appliance:
T= Depth of furniture unit K minus
depth of appliance G
 Cut the spacer strip supplied to
measurement T. Score along the
groove for the smaller measurement
as shown, and remove the surplus.
Installation
31