Miele DA 3466 Operating And Installation Instructions page 22

Cleaning and care
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
– cleaning agents containing descaling
agents,
– powder cleaners or cream cleaners,
– aggressive all-purpose cleaning
agents or spray cleaners for grease,
– oven sprays.
Cleaning the grease filter in a
dishwasher
 Place the filter as upright as possible
in the lower basket, with the short
side upright, ensuring the spray arm
is not obstructed.
 Use a proprietary household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the cleaning agent
used, cleaning the grease filter in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filter in any way.
After cleaning
 After cleaning, leave the grease filter
to dry on an absorbent surface
before refitting it.
 When removing the filter for cleaning,
also clean off any residues of oil or
fat from the now accessible casing to
prevent the risk of these catching fire.
22
Fitting the grease filter
 When fitting the grease filter, make
sure that the red plastic guides are at
the front and facing upwards.
 Place the grease filter in the front of
the deflector plate, press it upwards
and push it in together with the
deflector plate. It will slide onto the
retaining pins at the back. Finally,
push the grease filter back a little
more.