Miele DA 3466 Operating And Installation Instructions page 27

a 1 exhaust connection
for exhaust ducting  150 mm.
b 1 non-return flap
for fitting into the exhaust
connection on the motor unit (not
needed for recirculation mode).
c 2 brackets
for securing the rangehood in the
wall unit.
d 1 spacer strip
for concealing the gap between the
rear of the appliance and the wall.
e Conversion kit for recirculation
mode
(not supplied, but available as an
optional accessory - see "Technical
data"). The kit contains an exhaust
grille and flexible aluminium hose
with hose clips.
f DML 400 installation kit for fitting
a drop-down front panel
(not supplied but available as an
optional accessory). Contains
hinging and screws for fitting a front
panel to match kitchen furniture.
8 screws 4 x 15 mm
for securing the rangehood in the wall
unit.
8 screws M4 x 12 mm
for securing the rangehood to the
brackets.
4 of the screws can be used instead of
the plastic rivets to secure the spacer
strip.
2 screws 4 x 15 mm for securing the
rangehood to the rear wall.
4 plastic rivets
for securing the spacer strip.
Installation
27