Table of Contents
Advertisement
1. With the activated SIM card and SD card in the
camera, turn the camera to setup. Press menu then
scroll over to the "SYS" tab and go down until you
see format, click on it and choose "yes" to format.
Scroll to the "NET" tab. Scroll down until "Download
Tool" appears. Press OK. Now turn the camera off,
eject the SD card and put into your Mac.
2. Go to http://www.codeweavers.com There you can
download a 14-day "trial" of "Crossover".
3. Once you have installed "Crossover"—and the
program is launched—a dialogue box will appear
that gives them several "dropdown" menu options.
Click on "Will Install Other Application."
4. Then click on "Will Install into the bottle
'COVERT.exe".
5. A new dialogue box will then pop up, allowing you
to locate the SD card within the Finder window,
select/click to enter the SD card, and can then
select the NET Setup file.
6. Once you click on that—the same dialogue box
shown in your "instructions" diagrams in the
manual will appear—and simply follow the steps as
your manual outlines.
Advertisement
Table of Contents
