Table of Contents
Advertisement
13) Press the OK button to accept the settings and
save them to the SD card. You will see the
following box pop up (Figure 16). Click OK and
this will cancel the COVERT Setup.
14) Remove the SD card from your computer and
replace it in the camera.
15) Slide the SELECTOR switch to the SETUP
position, and wait 15-20 seconds to show
update success. Wait for the camera to go
through its set up process and find cellular
service. Press the MENU button.
16) Press the button that has the CAMERA symbol
on it (1) time to manually take a photo with the
camera. You will know that a photo has been
Figure 16
Advertisement
Table of Contents
