Table of Contents
Advertisement
camera to automatically take a photo without being
triggered by the PIR. If you already set the
Sensitivity to OFF, then the camera will only take
photos when the Time-Lapse option is on. If you
have the PIR set to L (<10℉) , N (10-80℉), or H
(>80℉), the camera will also take photos when the
PIR is triggered. To turn the Time-Lapse option on,
use the ◄ and ► buttons to choose a time option.
5-60 seconds (in 5 second increments) 2-60 minutes
and 2-8 hours. Once you have chosen the time
option you want, press OK to save the setting. The
camera will continuously take photos in timed
increments you set. Remember, this will generate a
lot of photos and you may want to limit the number
of photos sent via MMS daily.
START-STOP: If you only want your camera to be
on during part of the day each day you can set the
Start-Stop function. The Code Black has a dual
start-stop option. Press the ▲ and ▼ buttons to
highlight the Start-Stop option. The default setting
Advertisement
Table of Contents
