5.7.2
Uninstalling a wall-mounted DNT2Mi
5.7.3
Installing a modem shelf into a 19-inch rack
30 (128)
Data Network Terminal Single-port and Multiport Operating Instructions
5.
Fasten the wall-mounting bracket on the wall.
•
Position the bracket on the wall and fasten it by screwing the
included wall screws into the drilling holes.
6.
Lift DNT2Mi on the wall.
•
Slide the fixing holes of the mounting bar into the hooks of the wall-
mounting bracket and lay the lower end of DNT2Mi down against
the wall.
To uninstall a wall-mounted DNT2Mi:
1.
Switch off the power.
2.
Disconnect the cabling.
3.
Lift DNT2Mi from the hooks of the wall-mounting bracket.
Figure 16.
Uninstalling DNT2Mi from the wall
Before installing DNT2Mi into a modem shelf, install the modem shelf into a 19-
inch rack or cabinet.
© Nokia Corporation
Nokia Proprietary and Confidential
DN01145897
Issue 2-0 en