26 (128)
Data Network Terminal Single-port and Multiport Operating Instructions
To insert DTE interface units:
1.
Make sure that the power is switched off.
Caution
The multiport version of DNT2Mi has three slots and the DTE interface units that
go to the upper slots (2 and 3) need to be inserted upside down.
2.
Insert a DTE interface unit carefully into the slot.
3.
Tighten the two screws.
Screws
Figure 12.
Inserting DTE interface units into DNT2Mi (single-port)
© Nokia Corporation
Nokia Proprietary and Confidential
DN01145897
Issue 2-0 en