Table of Contents
Advertisement
Available languages
Available languages
LIGHTED HOUSING BULB REPLACEMENT
1.
CAUTION: Allow motor housing (L) and bulbs
(C) to cool before trying to access bulbs (C) in
lighted housing.
Locate four access covers in the bottom of the
motor housing (L). Determine which access cover(s)
will need to be removed to access burned out
bulb(s) (C). Remove two screws from each access
cover that will need to be removed. Remove each
burned out bulb (C) and replace with a
candelabra-base 7-watt max. bulb. (Fig. 1)
Replace access cover(s) with screws that were
removed.
OPERATION INSTRUCTIONS
1.
The pull chain located on the switch housing has
four positions to control fan speed. One pull is
HIGH, two is MEDIUM, three is LOW and four
turns the fan OFF. (Fig. 1)
2.
The pull chain located in the center has four
positions to control the lights. One pull turns the
LOWER lights (light kit) on, two pulls turns the
UPPER lights (lighted housing) on, three pulls turns
ALL of the lights on, and four pulls turns ALL of the
lights OFF. (Fig. 2)
1
Access
Cover
1
2
14
L
Switch
Housing
C
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the WO52BB5C and is the answer not in the manual?
Questions and answers
Can I still get replacement arms for this ****?
Can I get a replacement motor for this **** E144 735 Model 703-52 120V 60Hz.5A Harbor Breeze Walcott Ceiling **** WO52BB5C
The manual states that any replacement of defective parts for the ceiling fan must be reported within the first year from the date of purchase. For the balance of the warranty, you need to call customer service at 1-800-527-1292 for return authorization and shipping instructions. It does not explicitly mention the availability of a replacement motor, so you should contact customer service for confirmation.
This answer is automatically generated