DeWalt D28715 Original Instructions Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Saw
  5. D28715
  6. Original instructions manual

DeWalt D28715 Original Instructions Manual

Heavy-duty 355 mm (14") chop saw with quick-change clamp
Hide thumbs Also See for D28715:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , Manual
D28715
Final Page size: A5 (148mm x 210mm)

Advertisement

Table of Contents
loading

Related Manuals for DeWalt D28715

Summary of Contents for DeWalt D28715

  • Page 1 D28715 Final Page size: A5 (148mm x 210mm)
  • Page 2 English (original instructions) Copyright D WALT...
  • Page 3 Figure 1 Figure 2...
  • Page 4 Figure 3 Figure 4 Figure 5 Figure 6...
  • Page 5 Figure 7 Figure 8 257 MM (10-1/8") 441 MM (17-3/8") Figure 9 508 MM (20") 50.8 MM (2") 101.6 MM (4")

  • Page 6: Technical Data

    English (original instructions) English HEAVY-DUTY 355 mm (14") CHOP SAW WITH QUICK-CHANGE CLAMP D28715 Congratulations! The vibration emission level given in this information sheet has been measured in accordance with a You have chosen a D WALT tool. Years of...

  • Page 7: Ec Declaration Of Conformity

    CHOP SAW 4. Dress properly. D28715 Do not wear loose clothing or jewellery, as these WALT declares that these products described can be caught in moving parts. Wear protective under Technical Data are in compliance with: hair covering to keep long hair out of the way.

  • Page 8: Additional Safety Instructions For

    English 12. Extension cables. 20. Repairs. Before use, inspect the extension cable and This tool is in accordance with the relevant replace if damaged. When using the tool safety regulations. Have your tool repaired by outdoors, only use extension cables intended an authorised D WALT repair agent.

  • Page 9: Residual Risks

    English • Check that the workpiece is properly supported. WARNING! Use of this tool can generate dust containing chemicals • Use the cutting discs recommended by known to cause cancer, birth defects or the manufacturer only. Do not use tools for other reproductive harm.

  • Page 10: Package Contents

    (see technical data). INTENDED USE The minimum conductor size is 1.5 mm . When Your D28715 chop saw has been designed for the using a cable reel, always unwind the cable cutting of variously shaped steel materials. completely. DO NOT use under wet conditions or in presence of flammable liquids or gases.

  • Page 11: Cutting Capacity

    English Voltage Drops CAUTION: Certain large, circular or irregularly shaped objects may require In rush currents cause short-time voltage drops. additional holding means if they cannot Under unfavourable power supply conditions, be held securely in vise. other equipment may be affected. If the system CAUTION: Do not cut magnesium impedance of the power supply is lower than with this tool.
  • Page 12 English Removal and Installation of Wheels before adjusting or changing set- ups or when making repairs. Be sure (Fig. 1, 7) the trigger switch is in the OFF position. An accidental start-up can cause injury. WARNING: To reduce the risk of injury, turn unit off and disconnect The fence (E) requires no tools to adjust.

  • Page 13: Optional Accessories

    English CRADLE MOUNTING WARNING: Never use solvents or other harsh chemicals for cleaning the 1. Cut two boards approximately 508 x 50.8 x non-metallic parts of the tool. These 101.6 mm (20" long x 2" high x 4") wide. chemicals may weaken the materials 2.
  • Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...

Table of Contents