Titan TTB674TAS Instruction Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Saw
  5. TTB674TAS
  6. Instruction manual

Titan TTB674TAS Instruction Manual

1500w table saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

1500W Table Saw
TTB674TAS
Barcode: 5052931563654
WARNING! Read the instructions before using the product!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TTB674TAS and is the answer not in the manual?

Questions and answers

Related Manuals for Titan TTB674TAS

Summary of Contents for Titan TTB674TAS

  • Page 1 1500W Table Saw TTB674TAS Barcode: 5052931563654 WARNING! Read the instructions before using the product!

  • Page 3: Your Product

    GUARANTEE This TITAN product carries a 2 year guarantee. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.

  • Page 4: Table Of Contents

    TTB674TAS by TITAN Let’s get started… These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Your product Technical and legal information Before you start detail... more Product functions...
  • Page 5 Your product TTB674TAS by TITAN Your product...
  • Page 6 Your product TTB674TAS by TITAN 1. Right extension table 15. Dust extraction hose 2. Saw blade 16. Rear extension table 3. Blade guard apron 17. Table insert 4. Rubber foot 18. Hose hold 5. Stand 19. Rip fence 6. Height adjusting handle 20.

  • Page 7: Technical Specifications

    Technical and legal TTB674TAS by TITAN information Technical specifications General > Input Voltage 230-240V~50Hz > Power Input 1500W > No Load Speed 4500min > Degree of Protection IP20 > Blade Size ø254mm × ø30mm × 2.8mm 40T > Main Table Size 430 ×...

  • Page 8: Safety Warnings

    Technical and legal TTB674TAS by TITAN information yyWxx: Manufacturing date code; year of manufacturing (20yy) and week of manufacturing (Wxx); Caution / Warning. Wear hearing protection. Read the instruction manual. Wear eye protection. Wear gloves. Wear respiratory protection. Class II construction.
  • Page 9 Technical and legal TTB674TAS by TITAN information wet locations. Keep the work area well lit. Do not use tools in the presence of flammable liquids or gases. 3. Guard against electric shock. > Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).

  • Page 10: Technical And Legal Information

    Technical and legal TTB674TAS by TITAN information 15. Disconnect tools. > When not in use, before servicing and when changing accessories such as blades, bits and cutters, disconnect tools from the power supply. 16. Remove adjusting keys and wrenches. >...
  • Page 11 Technical and legal TTB674TAS by TITAN information ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR TABLE SAW > Wear eye protection. > Do not use the tool in presence of flammable liquids or gases. > NEVER use the tool with an abrasive cut-off wheel installed.
  • Page 12 Technical and legal TTB674TAS by TITAN information > Before using the tool on an actual work piece, let it run for a while. Watch for vibration or wobbling that could indicate poor installation or a poorly balanced blade. > The tool should not be used for slotting, rabbetting or grooving.
  • Page 13 Technical and legal TTB674TAS by TITAN information > Never try to remove chips while the saw blade is running or the tool is switched > Never try to use the tool unless all guards and other safety devices necessary for tool are in good working order.
  • Page 14 Technical and legal TTB674TAS by TITAN information The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration. Calculating the actual period of the actual period off use can be difficult and the HSE website has further information.

  • Page 15: Intended Use

    Before you start TTB674TAS by TITAN Intended use When used for its intended purpose, this device corresponds to the state of the art, as well as to the current safety requirements at the time of its introduction. The device is intended for longitudinal and cross-cutting of solid wood, coated wood, chip board, block board and similar woodlike materials.
  • Page 16 Before you start TTB674TAS by TITAN people and property. > Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment. The following items are included with your Table Saw: For table saw: Left &...
  • Page 17 Before you start TTB674TAS by TITAN Hex bolts M6 x 12 Screw ST3.2×10 [33] x 04 [34] x 04 For stand: Rubber foot Flat washer 6 Spring washer 6 Hex nuts M6 [4] x 04 [28] x 20 [29] x 16...

  • Page 18: Before You Start

    Before you start TTB674TAS by TITAN WARNING: Risk of injury! Always pull out the mains plug (disconnect the product from its power supply) before commencing work on the product. To assemble the left & right extension tables > Place cardboard or an old blanket on floor in order to protect the surface of the working table.

  • Page 19: Hex Bolts

    Before you start TTB674TAS by TITAN Fig. 2 NOTE: Only one hole [42,43] on the side of the extension tables must be in the front after finished. > Attach two supporting bars [26] with the left extension table with flat washers 6 [28], spring washers 6 [29], hex nuts M6 [30] and hex bolts M6 x 16 [31].

  • Page 20: Hex Bolts

    Before you start TTB674TAS by TITAN > Attach two supporting bars [26] and hose hold [18] with the right extension table with flat washers 6 [28], spring washers 6 [29], hex nuts M6 [30] and hex bolts M6 x 16 [31].
  • Page 21 Before you start TTB674TAS by TITAN Fig. 5 To assemble the push stick hold > Turn the table saw right way up with two person handling. > There are push stick holds on the left side of the machine. You can connect the push stick holds [20] with four screws ST3.2 x 10 [34] supplied and you can put...
  • Page 22 Before you start TTB674TAS by TITAN To assemble the riving knife > Loosen the eight cross-screws [44] with the screwdriver and remove the table insert [17]. (Fig. 8) Fig. 8 > Loosen the hex nut M6 [45] on the riving knife [24], remove the screw M6 x 45 [46], flat washer 6 [47] and hex nut M6 [45].
  • Page 23 Before you start TTB674TAS by TITAN > Loosen the blade bevel locking handle [10] and tilt the bevel adjusting handwheel [8] to 90° and turn height adjusting handle [6] to raise the blade to its highest position. Tighten the blade bevel locking handle [10]. (Refer to the sections “bevel locking handle”, “bevel adjusting handwheel”...

  • Page 24: Hex Bolts

    Before you start TTB674TAS by TITAN To assemble the front rail & rip fence > Insert the hex bolts M6 x 16 [31] through the holes on the working table, left and right extension tables, then put the flat washers 6 [28], spring washers 6 [29] and loosely tighten on the hex nuts M6 [30] as shown in the Fig.
  • Page 25 Before you start TTB674TAS by TITAN > Tighten the rip fence locking handle [22] on the rip fence [19] with the knurled screws [50]. Rip fence locking handle [22] can be mounted on left or right of the rip fence [19] as shown in Fig. 14.
  • Page 26 Before you start TTB674TAS by TITAN > Tighten all the hex nuts M6 [30] of the rails. > Loosen the rip fence locking handle [22], place the rip fence on the desired position of the working table, keep the rip fence is level on the working table, then push down the rip fence locking handle [22] in order to lock the rip fence in position.
  • Page 27 Before you start TTB674TAS by TITAN 47 45 Fig. 17 To attach the mitre gauge > Push the guide rail [53] of the mitre gauge [12] into one of the guide grooves of the working table intended for this purpose.

  • Page 28: To Assemble The Stand

    Before you start TTB674TAS by TITAN To assemble the stand NOTE: The table saw can now be operated firmly mounted on a workbench. > Bolt the long & short top leg brackets [35, 36] and long & short bottom leg brackets [37, 38] to the stand legs [39] using screws M6 x 12 [40], flat washers 6 [28], spring washers 6 [29] and hex nuts M6 [30].
  • Page 29 Before you start TTB674TAS by TITAN Attach the table saw to the stand > Place the stand on a flat surface. > Place the table saw on top of the stand, aliging the holes in the base with the holes in the stand.
  • Page 30 Before you start TTB674TAS by TITAN To mount the table saw onto the workbench If the stand is not used, the table saw must be properly secured to a sturdy workbench using the four mounting holes on the saw base.
  • Page 31 Before you start TTB674TAS by TITAN > Attach the dust extraction hose [15] to the dust ports [56] on the blade guard and the side B [57] dust extraction adapter [27] as shown in the Fig. 22. Fig. 22 > For the work piece passed successfully, to fix the dust extraction hose [15] in the slot of the hose hold [18] before sawing.

  • Page 32: Check Before Starting

    Before you start TTB674TAS by TITAN > To prevent sawdust buildup, for best result, attach a vacuum hose (not included) to the side C [58 ] of the dust extraction adapter [27] (See Fig. 22). DO NOT operate the saw with hose in place unless the vacuum is turned on.
  • Page 33 TTB674TAS by TITAN detail… more Product functions Care and maintenance Recycling and disposal Trouble shooting EC declaration of conformity...
  • Page 34 Product functions TTB674TAS by TITAN OPERATION CONTROLS On/Off switch Warning: Risk of injury! Before turning on the switch make sure the blade guard is correctly installed and operating properly. Switching on: > To start the machine by pressing the green I-button [59] on the On/Off switch [7].
  • Page 35 Product functions TTB674TAS by TITAN Overload reset switch > This saw is equipped with a overload reset switch. It is situated at the immediate top of the On/Off switch. The overload reset switch [9] (See Fig. 24) will restart the motor after it shuts off due to overloading.
  • Page 36 Product functions TTB674TAS by TITAN Lock Unlock Fig. 25 Bevel adjusting handwheel > The saw blade can be adjusted steplessly between 0° and 45°. The bevel adjusting handwheel [8] is used to tilt the blade for bevel cutting. Loosen the bevel locking handle [10], then turn bevel adjusting handwheel clockwise to tilt toward the left and anti-clockwise to tilt toward the right.

  • Page 37: Product Functions

    Product functions TTB674TAS by TITAN Height adjusting handle > The height adjusting handle [6] is used to raise and lower the blade. Turn clockwise to lower the blade and anticlockwise to raise it. (Fig. 25) The cut height of the saw blade must be adjusted to the height of the work piece: The saw blade must always be lowered onto the work piece.

  • Page 38: Push Stick

    Product functions TTB674TAS by TITAN Fig. 26 Push stick > Push stick [21] is a device used for safely pushing a work piece through the blade instead of using your hands. They can be made from scrap wood in various sizes and shapes to be used in a specific project.

  • Page 39: Mitre Gauge

    Product functions TTB674TAS by TITAN Fig. 27 Mitre gauge > The head is locked in the desired position for crosscutting or mitring by tightening the locking handle. Always lock it securely when in use. Adjust the angle of the mitre gauge The stop profile can be adjusted by a maximum of 60°...
  • Page 40 Product functions TTB674TAS by TITAN > Loosen the mitre gauge locking handle (62). > By turning the parallel profile [61], set the desired angle on the scale [63]. > Tighten the mitre gauge locking handle (62). Fig. 28 BASIC TABLE SAW OPERATIONS...
  • Page 41 Product functions TTB674TAS by TITAN For safety reasons, verify that the operator has read the section entitled general safety guidelines for the table saw before operating this saw. Verify the following before every time the table saw is used: > The blade is tight.
  • Page 42 Product functions TTB674TAS by TITAN > Turn the saw ON, and wait for the blade to reach full speed. > Slowly feed the work piece into the blade by pushing forward on the section of the work piece that will pass between the blade and the fence.

  • Page 43: Bevel Ripping

    Product functions TTB674TAS by TITAN Bevel ripping > Bevel ripping is the same as ripping, except that the blade bevel angle is set to an angle other than “0”. Warning: Risk of injury! The work piece and the fence must be on the right side of the blade when cutting.
  • Page 44 Product functions TTB674TAS by TITAN > Start the saw, and wait for the blade to reach full speed. Do not stand directly in line with the saw blade’s path. Instead, stand on the side where the cut is being made.

  • Page 45: Compound Miter Crosscutting

    Product functions TTB674TAS by TITAN Bevel crosscutting 0° - 45° blade bevel & 90° mitre angle > This operation is the same as crosscutting, except that the blade is at a bevel angle other than 0°. > Adjust the blade to the desired angle, and then tighten the blade bevel locking handle.
  • Page 46 Product functions TTB674TAS by TITAN > Set the miter gauge to the desired angle. > Set the blade bevel to the desired bevel angle, and tighten the blade bevel locking handle. > Hold the work piece firmly against the face of the miter gauge throughout the cutting operation.
  • Page 47 Product functions TTB674TAS by TITAN Fig. 33 ADJUSTMENT Adjusting the bevel stops This saw has positive stops that will quickly position the saw blade at 90° or 45° to the working table. The angle settings of the saw have been set at the factory and, unless damaged in shipping, should not require setting during assembly.
  • Page 48 Product functions TTB674TAS by TITAN > Using a square [63], set the blade to exactly 90°. (Fig. 34) Fig. 34 > If the blade stops bevelling before it gets to 90°, loosen the 90° stop screw [64] (located on the left under the table) (Fig. 35) with the hex key (not included), and then adjust it to 90°.
  • Page 49 Product functions TTB674TAS by TITAN Fig. 36...

  • Page 50: General Cleaning

    Care and maintenance TTB674TAS by TITAN The golden rules for care WARNING! Always switch the product off, disconnect it from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! > Keep the product clean. Remove chips from it after each use and before storage.
  • Page 51 Care and maintenance TTB674TAS by TITAN Lubrication > All motor bearings are permanently lubricated at the factory, and do not require any additional lubrication. > Use graphite or silicone to lubricate all mechanical parts of the table saw where a pivot or threaded rod is present.
  • Page 52 Care and maintenance TTB674TAS by TITAN NOTE: During installation, make sure that the saw blade is sitting correctly on the arbor. WARNING! Risk of injury! The arbor nut may not be tightened too much. Product damage and severe injuries may result! >...

  • Page 53: Care And Maintenance

    Care and maintenance TTB674TAS by TITAN Plug replacement If you need to replace the fitted plug then follow the instructions below. Important The wires in the mains lead are coloured in accordance with the following code: Green & yellow - Earth...
  • Page 54 Care and maintenance TTB674TAS by TITAN Repair > This product does not contain any parts that can be repaired by the consumer. Contact a qualified specialist to have it checked and repaired. > If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a safety hazard.
  • Page 55 Care and maintenance TTB674TAS by TITAN > Always store the product in a place that is inaccessible to children. > Store the product, operating instructions and where necessary the accessories in the original packaging. In this way you will always have all the information...

  • Page 56: Recycling And Disposal

    Recycling and disposal TTB674TAS by TITAN Recycling and disposal > Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

  • Page 57: Trouble Shooting

    Trouble shooting TTB674TAS by TITAN Trouble shooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these...
  • Page 58 Trouble shooting TTB674TAS by TITAN Problem Possible cause Solution The work piece is 1. The fence is not being 1. Use the fence. touching the back used. of the saw blade 2. The saw blade is 2. Replace blade or mount...

  • Page 59: Declaration Of Conformity

    EN 55014-1:2006/A2:2011 EN 55014-2:1997/A2:2008 EN 61000-3-2:2014 EN 61000-3-11:2000 Authorised Signatory and technical file holder Date : 20/07/2015 Signature:_________________ Name / title: Peter Harries / Quality Manager Titan Power Tools (UK) Ltd. Trade House, Mead Avenue, BA22 8RT 1500W TABLE SAW TTB674TAS...
  • Page 60 Titan Power Tools (UK) Ltd Trade House, Mead Avenue, BA22 8RT 9486J_V01...

Table of Contents

Save PDF