Quick Start Function - Canon HR10 Instruction Manual

" I
I
• You can also use the T and W buttons
on the wireless controller or the LCD
panel. The zoom speed will be the same
as with the camcorder or fixed at
[~SPEED
3] (when [m1VARIABLE] is
selected).
• When set to [l!lillJVARIABLE], the zoom
speed will be faster in record pause
mode.
Quick Start Function
When you press
[QUICK START]
the
camcorder enters the @ standby
mode. In standby mode the camcorder
consumes only about half the power
used when recording, saving energy
when you are using a battery pack.
Additionally, when you press
[QUICK START]
again the camcorder is
ready to start recording within approx.
1 second, ensuring you do not miss
important shooting opportunities.
POINTS TO CHECK
(OJ 26)
1
Press
[QUICK START)
firmly.
The standby lamp flashes at first
while the camcorder is preparing and
then stays on when it enters the
standby mode.
2
When you wish to resume •
recording, press
[QUICK START)
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
CD
NOTES
• When you wake up the camcorder from
standby mode, the following settings
will be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns
to automatic exposure.
- Zoom position returns to full wide
angle W.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
(OJ 52). You can select the length of
time until shut-off with the [@STANDBY
OFF] setting
(OJ 53).
To restore the power if the camcorder
shut off, slide the liI'l\'4ij;J switch toward
MODE and release it, or move the
liI.Wlij;J switch to _ and back to ON
again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
return to record pause mode.
- Open the disc compartment cover.
- Change the position of the -" /
Q
switch.
- Slide
the 1:l.)§11;:/
switch
toward MODE.
39
" I
I
• You can also use the T and W buttons
on the wireless controller or the LCD
panel. The zoom speed will be the same
as with the camcorder or fixed at
[~SPEED
3] (when [m1VARIABLE] is
selected).
• When set to [l!lillJVARIABLE], the zoom
speed will be faster in record pause
mode.
Quick Start Function
When you press
[QUICK START]
the
camcorder enters the @ standby
mode. In standby mode the camcorder
consumes only about half the power
used when recording, saving energy
when you are using a battery pack.
Additionally, when you press
[QUICK START]
again the camcorder is
ready to start recording within approx.
1 second, ensuring you do not miss
important shooting opportunities.
POINTS TO CHECK
(OJ 26)
1
Press
[QUICK START)
firmly.
The standby lamp flashes at first
while the camcorder is preparing and
then stays on when it enters the
standby mode.
2
When you wish to resume •
recording, press
[QUICK START)
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
CD
NOTES
• When you wake up the camcorder from
standby mode, the following settings
will be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns
to automatic exposure.
- Zoom position returns to full wide
angle W.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
(OJ 52). You can select the length of
time until shut-off with the [@STANDBY
OFF] setting
(OJ 53).
To restore the power if the camcorder
shut off, slide the liI'l\'4ij;J switch toward
MODE and release it, or move the
liI.Wlij;J switch to _ and back to ON
again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
return to record pause mode.
- Open the disc compartment cover.
- Change the position of the -" /
Q
switch.
- Slide
the 1:l.)§11;:/
switch
toward MODE.
39