Control Panel - Husqvarna 420 Operator's Manual

5 Control Panel

All forms of commands and settings for the robotic
lawnmower are made via the control panel. All functions
are accessed via a number of menus.
The control panel consists of a display and a keypad. All
information is shown on the display and all input is done
using the buttons.
When the STOP button has been pressed and the
hatch is opened, the start page is displayed showing the
following information:
• Operating information, e.g. MOWING, PARKED
or TIMER. If the stop button is pressed while the
robotic lawnmower is running, what it did just before
it was stopped e.g. MOWING or SEARCHING is
displayed. The text READY is displayed if the robotic
lawnmower is not in any specific operating mode, e.g.
if the main switch has just been turned on.
• Date and clock show the current time.
• Automower 430X and Automower
®
satellite system is shown when GPS assisted
navigation is enabled. Symbol (A) is displayed when
the robotic lawnmower has established contact
with a sufficient number of GPS satellites. Symbol
(B) is displayed if the robotic lawnmower does not
have contact with a sufficient number of satellites.
Symbol (A) flashes during the first days the robotic
lawnmower is working as it gathers GPS information
concerning the installation.
• The ECO symbol is displayed if the robotic
lawnmower is set to ECO mode.
• The black clock symbol (C) is displayed when the
robotic lawnmower is not allowed to mow due to a
timer setting. If the robotic lawnmower is not allowed
to mow due to the Weather Timer, symbol (D) is
displayed. If the Override Timer operating mode is
selected, symbol (E) will be displayed.
• The battery status shows the remaining battery charge.
If the robotic lawnmower is being charged, a flash
symbol will be displayed above the battery symbol (F).
If the robotic lawnmower is standing in the charging
station but not charging, (G) will be displayed.
• The height adjustment setting is displayed as a scale/
numerical value.
• The number of operating hours shown is the number
of hours since its day of manufacture that the robotic
lawnmower has been in operation. The time that the
robotic lawnmower has spent mowing or looking for
the charging station is counted as operating time.
• If using the Profiles function, the name of the active
profile will be displayed. An asterisk next to the name
indicates that the profile has changes that have not
been saved.
1157866-26,420,430X,450X,EN_160314.indd 37
CONTROL PANEL
450X. The
®
A B
C D E
F G
3012-1094
3012-1260
3012-570
3012-1379
3012-1266
3012-569
English - 37
2016-03-14 16:58:56