Samsung GT-i9100 Service Manual page 26

7. Level 2 Repair
5
Put the PBA on the Front.
Attach the side FPCBs on the Bracket.
Be careful to damage the cable.
7
1
2
3
4
Joint the Rear and the Front.
(Follow the order)
Hook at the 12 points.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
Connect all the connector on the PBA.
Connect the cable on the PBA.
8
Screws at 7 points.
(Torque: 1.1±0.1 kgf.cm)
(Size: M1.4*L3)
Be careful not to scratch rear cover.
7-4