Toshiba E-STUDIO 281C Printing Manual page 307

Depending on the type of finisher installed and destination settings, stapling and hole
punching may not be performed.
Depending on the equipment settings, the paper may be delivered to a tray that cannot
carry out stapling or hole punching when "Auto" is selected as the "Destination" option.
"Tray 1" and "Tray 2" can be selected when the Hanging Finisher, Finisher, or Saddle
Stitch Finisher are installed.
2) Hole Punch
This sets whether or not a print job is hole punched.
- Off — Select this to print without hole punches.
- Long Edge Punch without rotation — Select this to create holes on the left side for the
portrait document, or on the top for the landscape document.
- Short Edge Punch without rotation — Select this to create holes on the top for the por-
trait document, or on the right for the landscape document.
- Long Edge Punch with 180 degree rotation — Select this to create holes on the right
side for the portrait document, or on the bottom for the landscape document.
- Short Edge Punch with 180 degree rotation — Select this to create holes on the bot-
tom for the portrait document, or on the left for the landscape document.
This option cannot be selected if a hole punch unit is not installed.
Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x 305