Finishing Tab - Toshiba E-STUDIO 281C Printing Manual

5) Paper Type
This sets the media type of the paper.
- Plain — Select this when printing on 20 lbs plain paper (64-80 g/m2 plain paper).
- Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m2 thick paper).
- Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m2 thick paper).
- Thick3 — Select this when printing on 110 lbs thick paper (164-209 g/m2 thick paper).
- Transparency — Select this when printing on transparent sheets.
6) Number of Copies
This sets the number of printed copies. You can set any integer from 1 to 999.
7) Orientation
This sets the paper printing direction.
- Portrait — The document is printed in the portrait direction.
- Landscape — The document is printed in the landscape direction.
8) Color
This sets whether a print job is printed in color mode or monochrome mode.
- Automatic — Select this to determine the color mode automatically. When a print job is
a black and white document, the system automatically prints the document in mono-
chrome mode. When a print job is a color document, it prints the document in color
mode.
- Black and White — Select this to print a document in monochrome mode.
Only "Black and White" can be selected for PCL6 printer driver because the PCL6 printer
driver only supports black and white printing.

Finishing Tab

The Finishing tab allows you to enable sort printing, 2-sided printing, N-up printing, stapling and
punching.
1
2
3
4
5
6
Setting Up Print Options 239