Siemens GIGASET SX762 WLAN DSL Manual page 89

ì
Choose On for Remote FTP service if you also want to make data available on the
Internet.
Internet users can access your USB mass storage by entering the public IP address in
the Internet browser. As Internet service providers often change this each time
someone dials in, it is worth using dynamic DNS (page 61) in addition.
ì
The Port field contains the port number via which local PCs and Internet users can
access your data. You should not change the default port number without very good
reason.
If you use a different port number, note that active FTP mode is then no longer pos-
sible. The FTP clients then have to be converted to passive FTP mode.
You can allow access for both FTP services generally or only for selected users with a
user name and password.
ì
For Access (read only), select whether all users are to be able to read your data in
Anonymous mode or whether only one Specified user is to be allowed.
ì
Specify whether Access (full control) to your data is disabled or whether a
Specified user may read, edit and delete your data.
ì
Enter the name in the Specified user field. Define different user names for the dif-
ferent types of access and directory.
ì
Enter the password for the user and confirm it by entering it again in the field below.
Please note that this is case-sensitive. Avoid using proper names and obvious terms.
Instead, use uppercase and lowercase letters, numbers and special characters.
ì
Click OK to apply the changes.
Configuring Advanced Settings
87