Siemens GIGASET SX762 WLAN DSL Manual page 122

Appendix
Symptom
Password forgotten or lost.
You cannot access a
resource (drive or printer)
on a different PC.
Operating information:
USB port
u
If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA. If this value is
exceeded, you will have to use a separate power supply unit for your USB device
or connect a USB hub with a separate power supply. A USB hard drive and a USB
printer can be operated simultaneously on a USB hub.
LAN ports
u
The LAN ports may only be used for in-house networks. The ports are destroyed
externally if there is a power surge.
Telephone ports
u
The phone ports are only suitable for connecting in-house phones/phone systems.
The ports are destroyed externally if there is a power surge.
120
Possible cause and solutions
ì
Reset the Gigaset SX762 WLAN dsl (page 20).
Warning: Please bear in mind that this will return all
the configuration settings to the factory settings.
ì
Make sure that TCP/IP has been installed and con-
figured on all the PCs in the local network and that
the PCs all belong to the same workgroup.
ì
Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.
ì
Printing: Check whether the printer has been set up
as a network printer.