Table of Contents
Advertisement
Item
Display Controller Function
Display Controller Channel
Display Name
Date/Time
Power Indicator Brightness Adjusts the brightness of the power indicator on the main unit. 5 is the brightest.
Protect Settings
Setting Options (underline indicates factory default)
Sets the function to assign to the F button on the display controller. Select an F button and assign a
function from the following list. The factory defaults for the display controller F buttons is as follow:
F1 : H Delay (On, Off)
F2 : V Delay (On, Off)
F3 : Monochrome (On, Off)
F4 : Blue Only (On, Off)
F5 : Red Off (On, Off)
F6 : Green Off (On, Off)
F7 : Blue Off (On, Off)
F8 : Screen Scaling (Native Input Resolution, 200%, Automatic)
F9 : Backlight Scan (On, Off)
F10 : Knob Lock (On, Off)
The following functions can also be assigned:
Channel UP
Channel DOWN
Backlight Control(Local Dimming (High, Middle, Low), Global Dimming, Off)
Aspect Marker (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
Time Code (On, Off)
Show OSD (On, Off)
CDL Override (On, Off)
CDL Save to Memory
CDL Load from Memory
CDL Export/Import
Peaking (Peaking 1/Peaking 2/Off)
Note
• When changing channels with "Channel UP/DOWN", the channels with "Input Configuration"
(
40) set to "–" are skipped.
• When the "Backlight Control" setting is switched using an F button, the information is applied
to "Backlight Control" in "Picture Mode". Likewise, when any marker settings are changed,
those changes will be applied to "Enable" under the currently selected "Marker Preset".
Sets the channel to assign to the CH button on the display controller.
Select a CH button and register a channel number. A list of settings under the menu "Channel
Settings" (
40) is displayed.
Sets the name of the main unit. You can input up to 16 alphanumeric characters.
Sets the year/month/date/hour/minute.
Off, 1 to 5 (2)
Locks the settings so they cannot be changed. When you press the MENU button, "Signal/System
Information" appears, but other operations are grayed out because they are locked.
OK: Performs protect settings.
Cancel: Returns to the previous screen without protect settings.
• Unlocking Protect Settings
Move the selection frame to "Protect Settings" and press the SET button for approximately 3
seconds.
OSD Menu
51
Advertisement
Table of Contents
