Table of Contents
Advertisement
Temporarily Saving Parameters (Anchor Point Setting)
Temporarily saves parameters while adjusting SHARPNESS, CHROMA, BRIGHTNESS, and CONTRAST allows you to
bring those parameters back.
1. Press the MENU button to open the OSD menu (
2. Select "Adjustment" with the
The selection frame moves to sub menu.
3. Select " Anchor Adjustment" with the
When the confirmation screen appears, select "OK". The parameter is saved and sets anchor point.
4. After readjusting the image quality, press the RESET button above the relevant adjustment on the display
controller.
Press the RESET button above the relevant adjustment to return to each saved anchor point.
Note
• When selecting "Reset" under "Adjustment" or "Reset All Settings" under "System Settings", any saved anchor points are
discarded and the settings return to their factory default values.
Using the Function (F) Buttons
You can assign functions to the F buttons on the display controller to execute them instantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings"→"Display Controller Function" and press the SET button.
A new window opens and displays button names F1 to F10.
3. Select a button name with the
The selection frame moves to next OSD menu level.
4. Select the function to assign with
See "Display Controller Function" (
5. Press the SET button.
The setting is confirmed.
Reference
• You can also assign functions to buttons F1 to F4 on the main unit. Select "Display Function" in step 2 (
• Select "Function Settings" → "Various Function" and set "Function Guide" to "On", then to check the list of functions
assigned to an F button on the main unit and display controller, press the SET button or an F button while OSD is closed
(
48).
27).
buttons and press the SET button.
buttons and press the SET button.
Anchor Point
buttons and press the SET button.
.
51) for the available functions.
Current adjustment value
Operating the Display Controller
50).
25
Advertisement
Table of Contents
