Item
Gamma
Color Gamut
ODT
Setting Options (underline indicates factory default)
Sets the Gamma.
2.2, 2.35, 2.4, 2.6, Canon Log to WideDR 1.1, Canon Log to DCI 1.2: Select a preset gamma.
"Canon Log to WideDR 1.1" supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log
** to WideDR ** LUT Version 1.1"*.
"Canon Log to DCI 1.2" supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log ** to
DCI (Gamma 2.6) ** LUT Version 1.2"*.
User LUT: When "User 1-7" or "Canon Log" is selected for "Picture Mode", load an external LUT
and configure.
*: Asterisk "**" indicates the bit count of LUT for the CINEMA EOS SYSTEM downloaded from Canon
website.
Color gamut can be selected when "User 1-7" or "Canon Log" is selected for "Picture Mode".
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3: Color gamut compliant to
each standard.
Cinema Gamut to 709, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI: Modes where
the color gamut is converted to monitor Cinema Gamut and DCI-P3+ video recorded by the EOS
C500/C500 PL of the CINEMA EOS SYSTEM.
Native: Color gamut that can be displayed by this video display.
User LUT: Sets by loading an external LUT.
Note
• When "ITU-R BT.2020", "Cinema Gamut to 709", "Cinema Gamut to DCI", "DCI-P3+ to 709"
or "DCI-P3+ to DCI" is selected, color gamut is converted and displayed on the DP-V3010 as
shown below. All data outside of the color gamut after conversion will be lost.
Color gamut of input video
ITU-R BT.2020
Cinema Gamut to 709
Cinema Gamut to DCI
DCI-P3+ to 709
DCI-P3+ to DCI
This is displayed instead of "Gamma" and "Color gamut" when "ACESproxy" is selected for "Picture
mode".
DCI-P3, ITU-R BT.709: ACESproxy is converted into respective mode.
Color gamut after conversion
on the DP-V3010
Native
ITU-R BT.709
DCI-P3
ITU-R BT.709
DCI-P3
OSD Menu
37