Page 3
Hard wiring thermostat Open thermostat and remove terminal block cover as shown in diag. - 3 -...
Page 4
Wiring diagram The thermostat can be used with any single Heating or Please note if using the 5/2 day set up, then Cooling system. you need to select one program for the 5 Inside the unit are three terminal blocks marked COM, days and a different one for the remaining 2 N/O and N/C.
Page 5
point where you want your first heating time 6° C below Comfort setting, this is to prevent ON. Then using the upward pointing triangle, your heating from coming on if the room temp continue to scroll along till you get to the point drops a couple of degrees below Comfort where you want the heating to switch off.
Need help?
Do you have a question about the TLX 6501 and is the answer not in the manual?
Questions and answers