1.5 Making Call Features
1.5.2
Automatic Extension Release
Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the user
will hear a reorder tone. This operation applies to intercom calls only.
This feature is also known as Automatic Station Release.
Conditions
•
A PT/PS user hears a reorder tone for a preprogrammed time period, and then the PT/PS returns to
idle status automatically. However, an SLT user hears a reorder tone until he goes on-hook.
•
This feature works in one of the following cases:
When making an intercom call
a)
If the first digit is not dialled within a preprogrammed time period.
b)
After a digit is dialled, if subsequent digits are not dialled within a preprogrammed time period.
Programming Manual References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→Dial—Extension First Digit
→Dial—Extension Inter-digit
→Tone Length—Reorder Tone for PT Handset
→Tone Length—Reorder Tone for PT Hands-free
PT Programming Manual
None
86
Feature Guide