Panasonic AG-CPD20P Operating Instructions Manual page 17

Connections
PC (commercially available,
for Back End Application)
For using the LPR
mode, use the [VIDEO
OUT 1] connector.
(Refer to "Setting LPR
mode" in Section 2:
Operation.)
Cameras
Remote Control Panel
(commercially
available)
Audio input 1-4
Camera cable
(provided with
the separately
sold Color
Camera)
Color Camera
(sold separately)
(continued)
LAN cable
(commercially
available)
(sold separately)
Connect a
commercially
available radar
gun
Trigger cable
(included in the separately
sold Cable Kit)
GPI 1-16
GND×2
GPO 1-4
DGND
PC (commercially available,
for Front End Application)
LAN cable
(commercially available)
GPS antenna
(included in the
separately sold
Cable Kit)
Wireless LAN module
(specified,
commercially
available)
Black : Connect to the negative
(GND: ) terminal of the battery.
Red : Connect to a terminal that
always supplies power
(BATT: )
through a fuse, regardless
of whether the engine is
on or off.
White : Connect the signal line
through a fuse to the
(SIGNAL)
ACC line or to the
output terminal of a
timer device.
Power cable
(included in the
separately sold
Cable Kit)
17