Control Reference Guide - Panasonic AG-CPD20P Operating Instructions Manual

Control Reference Guide

Front panel (1)
REC button ( )
Starts recording of video and sound
to an SDHC Memory Card.
STOP button ( )
Stops recording.
SDHC Memory Card lamps 1,
2, 3, and 4
Light in green when SDHC Memory
Cards are inserted in the SDHC
Memory Card slots. The lamp for the
card to be used for recording lights
in orange (refer to "Indicator Lamps
and Recorder Status" in Section 2:
Operation).
SDHC Memory Card slots 1, 2,
3, and 4
Insert SDHC Memory Cards here.
Up to four cards can be inserted
simultaneously.
REC lamp
Lights up during recording. If the
combined remaining recording time
for the cards inserted in the SDHC
Memory Card slots 1, 2, 3, and 4 is
less than 30 minutes, the lamp starts
flashing (refer to "Indicator Lamps
and Recorder Status" in Section 2:
Operation).
READY lamp
Lights up when recording is possible
on an SDHC Memory Card inserted
in an SDHC Memory Card slot (refer
to "Indicator Lamps and Recorder
Status" in Section 2: Operation).
BUSY lamp
Lights up or flashes while an SDHC
Memory Card is accessed (recording
or playback; refer to "Indicator
Lamps and Recorder Status" in
Section 2: Operation).
UPLOAD lamp
Stays lit while the recorder is
connected with a Back End
Application installed.
While data recorded on an SDHC
Memory Card are being uploaded
or exported, the lamp flashes (refer
to "Indicator Lamps and Recorder
Status" in Section 2: Operation).
11