NEC UNIVERGE SV9100 Programming Manual page 97

ISSUE 2.0
SV9100 PC Programming Manual
6. Safely eject the old SD Card from Windows.
7. Insert the destination SD Drive into the PC.
8. Click on Copy SD card. The window that comes up allows for items to be
selected or deselected as needed. All of the choices are optional:
System Database: The system database as programmed, the same

information as would be included in a database backup.
License Data: Any licenses that have been applied to the system.

InMail Messages: Saved voice mail messages.

InMail Greetings: Recorded user greetings.

Main System software: The system software on the SD Card to be

copied, for example v1.70.00. If this option is not selected the software
installed on the destination GCD-CP10 will be used. If this option is
selected the software version of the originating SD Drive will be used on
the new system.
9. Select the desired option(s).
10. Choose the destination drive from the pull down menu, then click OK.
6-9