Installation
S
1
S
ECTION
YSTEM
The process of installing PCPro is straight-forward. Just run the installation program
and follow the instructions.
system requirements necessary for install PCPro on your computer.
CPU
Memory
OS
Other
Communication port
Disk Space
TCP Port
S
2
D
ECTION
EFAULT
When installing PCPro for the first time, the installation program creates a set of
default PCPro accounts. The accounts with the user name and password to access
these accounts are provided in
User Name
necii
SV9100 PC Programming Manual
R
EQUIREMENTS
Table 2-1 System Requirements
Table 2-1 System Requirements
System:
CPU and Memory are dependent on the Microsoft Operating System
environment used.
Vista, Windows 7 (32/64bit), Windows 8/8.1
Microsoft Internet Explorer 7.0/8.0/9.0/10.0
LAN, Modem or ISDN
1GB for PCPro (minimum)
PCPro must have TCP port 8000 open between the chassis and the
host PC. Communications between PCPro and the chassis occurs
on this port when uploading / downloading via LAN.
The PCPro TCP port is 8000 at default, but this can be changed
through the Administration>WebPro Settings section of WebPro
using PRG 90-54-02. PRG 90-54-02 is not accessible from
telephone programming or PCPro.
The port to be used for debug should be defined in 10-20-06.
PCP
A
RO
CCOUNTS
Table 2-2 Default PCPro Accounts
Password
47544
Minimum Requirements
Table 2-2 Default PCPro
Access Level
Manufacturer Mode (MF)
UNIVERGE
®
SV9100
Chapter 2
lists the minimum
Accounts.
2-1