REMOTE ENGINE START-UP
Dark
Radio
Media
Driving eco2
Nav
Set Time
1
When fitted, this function lets you pro-
gramme the engine to start remotely, in
order to heat or ventilate the passen-
ger compartment up to 24 hours before
using the vehicle.
Setting the start time for the
function
– Switch on the ignition, then press 1
from the main menu. Screen A is dis-
played;
– Select the "On" button on the
"Automatic Start" line to activate the
function;
– set the start time when you wish
to use your vehicle by pressing
button 2;
GB.62
(1/3)
A
Remote Engine Start
Warning: Never park your vehicle in an enclosed room
Automatic Start
Phone
Car Ready for
Wake up every 2 hours
Settings
Car will be ready in 0 hours & 0 minutes
3
– press on the "up" and "down" arrows
to scroll through the hours and min-
utes until you get the desired time;
– press "OK" to confirm. The 3 marker
shows you the time left before the
time you wished to use the vehicle.
– Adjust the air-conditioning controls to
the desired temperature in the pas-
senger compartment when starting
up the engine (please see Section 2
of the vehicle manual), then switch
off the ignition.
2
Off
On
Change
Off
On
OK
The remote engine start-up operates if:
– the lever is in neutral for vehicles
– the lever is in position P for vehicles
– the ignition is switched off;
– all the opening elements (bonnet,
Remote Engine Start
Departure Time Set
OK
with a manual or sequential gearbox;
with an automatic gearbox;
doors, boot) are closed and locked
when you leave the vehicle.
Need help?
Do you have a question about the Media Nav Evolution and is the answer not in the manual?
Questions and answers