ET1 Enterprise Tablet User Guide
4.
LED
5.
Exit Window
Procedure Steps
1
Ensure that an application is open on the ET1 and a text field is in focus (text cursor in a text field).
Aim the scanner at the bar code.
2
3
Press the scan (+) button.
Figure 3-6 CS3070 Scanning
Ensure the scan line crosses every bar and space of the symbol.
4
Figure 3-7 Linear Scanner Aiming Pattern
5
The scanner beeps and the LED turns green to indicate a successful decode.
6
The captured data appears in the text field.
3.8 Reading Magnetic Stripe Cards with
Scanning/MSR Module
Use the Scanning/MSR Module to read magnetic stripe cards.
3-6
MN000022A01 - May 2013