Single-Slot Usb Docking Cradle - Motorola ET1 User Manual

ET1 Enterprise Tablet User Guide
Table 7-1 ET1 Accessories (cont'd.)
Accessory
Spare 5640 mAh
lithium-ion
battery
Handstrap
Scanning
Module
Scanning/MSR
Module
Protective
Rubber Bezel
Mobile Payment
Module

7.2 Single-slot USB Docking Cradle

The Single-slot USB Docking cradle:
• Provides 12 VDC power for operating the ET1.
• Synchronizes information between the ET1 and a host computer. See the ET1 Enterprise Tablet Integrator Guide
for information on setting up a connection to a host computer.
• Charges the battery.
Charging the ET1 Battery
Connect the cradle to power, then insert the ET1 into the slot to begin charging.
7-2
Part Number
BTRY-ET01EAB0H
BTRY-ET01EAB0H-10
SG-ET0123245-01R
SCANMOD-ET1
MSRSCAN-ET1
KT-161552-01R
MPM-100
Description
Replacement 5640 mAh battery for ET1N0 and ET1N2.
Replacement 5640 mAh battery for ET1N0 and ET1N2
(10-pack).
Adjustable and 360-degree rotatable handstrap that mounts on
the back of the ET1 and provides a secure option for holding
the device.
Provides 2D bar code scanning.
Provides 2D bar code scanning and magnetic stripe card
reading.
Add additional protection for the ET1.
Adds mobile point of sale capable of Chip and PIN, and MSR
transactions to the ET1.
MN000022A01 - May 2013