Motorola ET1 User Manual page 112

ET1 Enterprise Tablet User Guide
Procedure Steps
1 Lift the connector plug on the USB Host Module.
Connect the microUSB connector to the USB Host Module.
2
Figure 7-6 USB Host Module Connection
Connect the USB/Charge Cable cup to the bottom of the ET1. Align the ends of the cup with the alignment
3
marks on the ET1.
When the ET1 is connected to a host computer using the USB/Charge cable, the ET1 appears as a Removable
Disk on the host computer.
7-8
MN000022A01 - May 2013