Yamaha DVD-C996 Service Manual page 27

3. Video Component Signal (CB) Output Confirmation
Do this confirmation after replacing a P.C.B.
Measurement point
Video output terminal (Y) (CB) Output terminal
Measuring equipment, tools
Screwdriver, Oscilloscope
100mV/div, 10 usec/div
Purpose: To maintain video signal output compatibility.
1. Connect the oscilloscope to the video output terminal and terminate at 75 ohms.
2. Apply the trigger at the Y output terminal signal.
3. Confirm that the video component signal (CB) level is 525 mVp-p ±11 mV (B, A, G Models) /486mVp-p ± 10 mV(U, C, R Models).
For B, A, G Models
For U, C, R Models
Mode
Color bar 75%
PLAY (Title 46): DVDT-S15
PLAY (Title 10): DVDT-S01
Confirmation value
525mVp-p±11mV (B, A, G Models)
486mVp-p±10mV (U, C, R Models)
486mV
±
10mV
DVD-C996/DV-C6280
Disc
DVDT-S15 (AAX07320)
or
DVDT-S01 (TX946080)
26