Download Print this page
Philips HR7740/80 Service Manual
Hide thumbs Also See for HR7740/80:

Advertisement

Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features
- Click & Go
- Powerful (800 W)
- Large bowl
(3,6 L dry, 1,8 L liquid capacity)
- Easy Clean button
- 2 speeds and pulse function
- Graphics on the appliance
- Suction feet
- Cord Storage
Accessories
- Extra thick, break resistant Blender Jar
(2,0 L dry, 1,5 L liquid capacity)
- Stainless steel metal blade
- Plastic insert holder
- Stainless steel slicing insert medium
- Stainless steel shredding insert medium
- Stainless steel shredding insert fine
- Stainless steel granulating disc
- Plastic kneading accessory
- Metal balloon beater
- Citrus press
- Plastic pusher
Safety
- Automatic resettable thermal cut off
- Built-in safety lock
- Brake system
Published by Philips Domestic Appliances and Personal Care
05/01
: Easy assembly and dissasembly system.
: Capable of handling even the toughest tasks.
: Capable of processing large batches at once.
: Easy cleaning of chopper bowl, which is also dishwasher safe.
: Optimally adjusting the speed to the job.
: Quickly choosing the right accessory for the job.
: Keeping the appliance perfectly stable and safe during operation.
: Adjusting the cord length to the specific situation.
: Blending, pureeing and shaking of fruits, dairy, batters, soups, vegetables,
meat and fish.
: Chopping, blending, pureeing, and mixing of meat, fish, vegetables, dairy,
fruits and nuts.
: Disc-shaped space-saving tool holder for different inserts.
: Slicing vegetables and fruits.
: Shredding vegetables, fruits and cheese.
: Shredding vegetables, fruits and cheese very fine.
: Granulating vegetables and fruits.
: Kneading all kinds of dough (up to 1,3 kg dough) and mixing cake batters
(up to 0,8 kg of batter).
: For all kinds of whipping, whisking and emulsifying jobs.
: For making large quantities (1,8L) of citrus juice in a short time.
: Pushing the ingredients in the bowl during the process.
: The pusher has a hole, so that oil can gradually be added.
: Protecting the motor against overheating.
: Detects whether lid & bowl are assembled.
: Stops the accessories within 1,5 seconds.
Printed in the Netherlands
Foodprocessor
HR7740/80
© Copyright reserved
Subject to modification

Advertisement

loading

Summary of Contents for Philips HR7740/80

  • Page 1 - Built-in safety lock : Detects whether lid & bowl are assembled. - Brake system : Stops the accessories within 1,5 seconds. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification...
  • Page 2: Technical Information

    TECHNICAL INFORMATION HR7740/80 - Motor : Universal, radio/TV interference suppressed - Power consumption : 800 Watt max - Voltage and frequency : 220 V - 240 V, 50 Hz - Cord set : 100 cm, double insulated with moulded on plug - Speed setting : 2 speeds &...
  • Page 3: Exploded View

    EXPLODED VIEW HR7740/80 Shown parts without Pos. no. are not available as spareparts!
  • Page 4 EXPLODED VIEW HR7740/80...
  • Page 5 EXPLODED VIEW HR7740/80...
  • Page 6: Repair Instruction

    REPAIR INSTRUCTION HR7740/80 To repair something inside the foodprocessor: 1. Remove the screw of the cord holder. To remove the Top Housing: 1. Push a screwdriver through the 3 Screw Caps to remove them. 2. Use a screwdriver Torx T15 to remove the 3 screws from...
  • Page 7 REPAIR INSTRUCTION HR7740/80 To remove the Housing: - In this situation, you could replace for example the cord set or the PCB. 1. Remove the Toolholder coupling by turning it counterclockwise with protected tongs to prevent the coupling from damages (You can use e.g. foam rubber).
  • Page 8 REPAIR INSTRUCTION HR7740/80 To remove the PCB´s: To remove the upper part of the coupling: 1. Remove the 2 screws to loosen the Main PCB. 1. Remove the retaining ring with a screwdriver. To remove the PCB Frame: To remove the lower part of the coupling: 1.
  • Page 9 REPAIR INSTRUCTION HR7740/80 To remove the toothed wheel: Remove the Belt tension, by lifting it a little bit (green arrow) and pulling it in direction of the red arrow. 1. Remove the retaining ring with a screwdriver. To replace the Motor: 1.