Figure 33. Removing and Installing the iDRAC port card
1.
iDRAC port card holder
3.
screw (2)
5.
iDRAC port card
Next steps
1.
Install the expansion card, if applicable.
2.
Install the expansion-card riser.
3.
Follow the procedure listed in
Related Tasks
Removing the expansion-card riser
Removing an expansion card
Installing an expansion card
Installing the expansion-card riser
88
After working inside your
2.
iDRAC port
4.
SD vFlash media card
6.
iDRAC port card connector
system.
Need help?
Do you have a question about the PowerEdge R430 and is the answer not in the manual?
Questions and answers