3
Installation
Intelligent Server Installation Method and Orientation
There are 2 types of setting methods and directions available for the server. Use the fixing metal plates
attached when installing the server.
(1)Surface mount
(2)Wall mount
Mount the server with the front face upward.
Fixing screw hole positions
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
6
AC inlet side
4
(Unit : mm)
6
280
4 x
4.6
Ø