Figure 2.7 Confirming The Ssl Setting Change; Figure 2.8 Logging Out Of The Remote Panel - Fujitsu ETERNUS LT260 User Manual
Tape library
Hide thumbs
Also See for ETERNUS LT260:
- User manual (84 pages) ,
- Quick start manual (5 pages) ,
- User manual (61 pages)
Table of Contents
Advertisement
Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
4
When the SSL confirmation screen for the change appears, click [OK].
Figure 2.7 Confirming the SSL setting change
5
To update the changed SSL setting, log out of the remote panel.
Figure 2.8 Logging out of the remote panel
After SSL is enabled, the method for connecting to the remote panel changes.
For the connection method, refer to
(page
FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
28).
Copyright 2016 FUJITSU LIMITED
"2.1.2.4 Connecting to the Remote Panel after Enabling SSL"
27
End of procedure
P3AG-1192-02ENZ0
Advertisement
Table of Contents
