Figure 2.4 Logging In To The Remote Panel - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.2.2 Logging in to the Remote Panel
This section provides the procedure for enabling the key management function.
To set the key management function, a security administrator account must be used to log in to the remote
panel.
When connecting the remote panel, use Internet Explorer 9 or later.
To log in to the remote panel with a security administrator account, the initial password of the account must
be changed from the operator panel in advance. For details, refer to
the Security Administrator Account" (page
Procedure
1
Enter "http://(IP address of the tape library)" in the address bar on the web browser to
access the remote panel.
2
Select [security] from the [User] pull-down menu.
3
For [Password], enter the security administrator account password that was set in
Changing the Initial Password of the Security Administrator Account" (page 23)
[Login].

Figure 2.4 Logging in to the remote panel

FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
23).
25
Copyright 2016 FUJITSU LIMITED
"2.1.2.1 Changing the Initial Password of
and click
End of procedure
P3AG-1192-02ENZ0
"2.1.2.1