Figure 2.3 Screen For Changing The Security Administrator Password - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2
Select [security] for [Select User].
3
Enter a new password in both boxes.
The password must be specified within 8 to 16 characters. Uppercase and lowercase alphanumeric
characters and special characters can be used.
4
After entering the password, click [Submit] to confirm the password.

Figure 2.3 Screen for changing the security administrator password

Keep the security administrator password in a safe place because even a maintenance engineer
cannot change the password.
5
Click [Logout] to log out of the operator panel.
FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
24
Copyright 2016 FUJITSU LIMITED
End of procedure
P3AG-1192-02ENZ0