Power Supply; Setting Up; Installing The Yamaha Steinberg Usb Driver - Steinberg ur12 Getting Started

Setting Up

manuals (PDF) opened from the [Help]
menu.
Version Information
The letters "x.x.x" and "x.xx" indicate the
version number.

Power supply

USB bus-pow
ered
The UR12 is a bus-powered type device
which can be powered by the host
computer connected via a USB cable. The
power automatically turns on when the
device is connected to the computer via a
USB cable and turns off when the device is
disconnected from the computer.
External power supply
The power also can be supplied via a USB
power adapter or USB mobile battery from
the [5V DC] port at the rear panel.
NOTICE
When turning on the AC power in your audio
system, always turn on the power amplifier
LAST. When turning the power off, the power
amplifier should be turned off FIRST.
NOTE
The [5V DC] port is used only for power
supply. The [USB 2.0] port is also used for
transferring digital audio data.
8 UR12 Getting Started
Setting Up
The following two setup procedures are
required before you can use the device with
a computer.
1. Installing Yamaha Steinberg USB Driver
2. Downloading Cubase AI (DAW)
1. Installing the Yamaha
Steinberg USB Driver
Follow the steps below to install the Yamaha
Steinberg USB Driver.
NOTE
• You are only permitted to use this software
pursuant to the terms and conditions of the
"License Agreement" shown during the
installation.
• Future upgrades of application and system
software and any changes in specifications
and functions will be announced at the
following website.
http://www.steinberg.net/
Windows
1.
Disconnect all USB devices other
than the mouse and keyboard from
the computer.
2.
Start the computer and log on to
the Administrator account.
Exit any open applications and close
all open windows.
3.
Insert the TOOLS for UR12 CD-
ROM into the CD-ROM drive.
4.
Open the CD-ROM then double-
click [setup.exe].
5.
Follow the on-screen instructions
to install the software.