Recovering The Factory Default - Zoom g9.2tt Service Manual

Recovering the Factory Default

In the factory default condition, the patches of the user area (A0-d9) contain the same
settings as the patches of the preset area (00-39). Even after overwriting the user patches,
their original content can be restored in a single operation ("All Initialize" function).
If necessary, back up the user's patch data. Refer to page 24, 25 for details of the back up.
1. Turn the power on while holding the [STORE] key.
The indication "AL" appears on the display.
2. To carry out the All Initialize function, press the [STORE] key once more.
All patch settings are returned to the factory default condition, and the unit switches to
play mode. To cancel All Initialize, press the [EXIT] key instead of the [STORE] key.
- 26 -