5.2
For general
instructions on the
modification of
settings, see
Section 2.1.3,
"Operations for
Modifying the Setting
Contents".
Section 5
Creating a User Pattern
5.2.1
Saving a user pattern
5.2.1-1
Overview
You can create and save user pattern designs.
Up to 40 characters can be saved (in every character size).
Three different character sizes can be generated:
5 x 8, 7 x 10, 12 x 16
An inter-character space between 0 and 8 can be selected. However, the
acceptable range of this setting depends on the character size.
The relationship between character sizes and acceptable inter-character spacing
is shown below.
Inter-character space
While an inter-character space of up to 3 dots can be selected for the character size
7 x 10 in the print format screen, only 1 dot is allowed when you create a user
pattern.
5.2.1-2
Operating procedure
Creating the pattern [ ] with the character size of 5 x 7 and inter-character spacing
of 0.
1. Verify that the printer is in "Stop" or "Standby" state. Choose [Auxiliary function]
from the menu.
The "Auxiliary function menu" screen opens.
2. Press [User pattern creation].
The "User pattern creation" screen opens.
Character size
Range
Default value
⊿
5 x 7 5 x 8 7 x 10 12 x 16
0 to 1
0 to 3
0
0
5.2 Creating a User Pattern
0 to 4
0
5–7